f07e572f64
bcm2708: boot tested on RPi B+ v1.2 bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G bcm2710: boot tested on RPi 3B v1.2 bcm2711: boot tested on RPi 4B v1.1 4G Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
37 lines
1.3 KiB
Diff
37 lines
1.3 KiB
Diff
From fcf08ed99d1421158ca913a7b6a4893c31ee1bd5 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.com>
|
|
Date: Tue, 15 Dec 2020 17:02:17 +0000
|
|
Subject: [PATCH] overlays: mpu6050: Add 'addr' parameter
|
|
|
|
The mpu6050 starts up at address 0x68 by default, but can be set to
|
|
0x69 if the ADO pin is pulled high. Give the overlay an addr parameter
|
|
to allow devices at the alternate address to be used.
|
|
|
|
See: https://github.com/Hexxeh/rpi-firmware/issues/252
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|
---
|
|
arch/arm/boot/dts/overlays/README | 1 +
|
|
arch/arm/boot/dts/overlays/mpu6050-overlay.dts | 1 +
|
|
2 files changed, 2 insertions(+)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1876,6 +1876,7 @@ Name: mpu6050
|
|
Info: Overlay for i2c connected mpu6050 imu
|
|
Load: dtoverlay=mpu6050,<param>=<val>
|
|
Params: interrupt GPIO pin for interrupt (default 4)
|
|
+ addr I2C address of the device (default 0x68)
|
|
|
|
|
|
Name: mz61581
|
|
--- a/arch/arm/boot/dts/overlays/mpu6050-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/mpu6050-overlay.dts
|
|
@@ -24,5 +24,6 @@
|
|
|
|
__overrides__ {
|
|
interrupt = <&mpu6050>,"interrupts:0";
|
|
+ addr = <&mpu6050>,"reg:0";
|
|
};
|
|
};
|