f07e572f64
bcm2708: boot tested on RPi B+ v1.2 bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G bcm2710: boot tested on RPi 3B v1.2 bcm2711: boot tested on RPi 4B v1.1 4G Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
51 lines
1.6 KiB
Diff
51 lines
1.6 KiB
Diff
From 30fbdcf8d58658860e43c0396cb50c5d4ade2dc5 Mon Sep 17 00:00:00 2001
|
|
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Date: Sat, 4 Jul 2020 03:04:38 +0300
|
|
Subject: [PATCH] dt/dtoverlays: imx219: Add parameter to set camera
|
|
module rotation
|
|
|
|
Add a rotation DT overlay parameter to allow specifying the camera
|
|
module mounting rotation. Set the default rotation to 180 as the module
|
|
is typically mounted upside-down.
|
|
|
|
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
---
|
|
arch/arm/boot/dts/overlays/README | 5 +++--
|
|
arch/arm/boot/dts/overlays/imx219-overlay.dts | 6 ++++++
|
|
2 files changed, 9 insertions(+), 2 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1433,8 +1433,9 @@ Name: imx219
|
|
Info: Sony IMX219 camera module.
|
|
Uses Unicam 1, which is the standard camera connector on most Pi
|
|
variants.
|
|
-Load: dtoverlay=imx219
|
|
-Params: <None>
|
|
+Load: dtoverlay=imx219,<param>=<val>
|
|
+Params: rotation Mounting rotation of the camera sensor (0 or
|
|
+ 180, default 180)
|
|
|
|
|
|
Name: imx290
|
|
--- a/arch/arm/boot/dts/overlays/imx219-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/imx219-overlay.dts
|
|
@@ -27,6 +27,8 @@
|
|
VDIG-supply = <&imx219_vdig>; /* 1.8v */
|
|
VDDL-supply = <&imx219_vddl>; /* 1.2v */
|
|
|
|
+ rotation = <180>;
|
|
+
|
|
port {
|
|
imx219_0: endpoint {
|
|
remote-endpoint = <&csi1_ep>;
|
|
@@ -110,4 +112,8 @@
|
|
cam0-pwdn = <&imx219_vana>,"gpio:4";
|
|
};
|
|
};
|
|
+
|
|
+ __overrides__ {
|
|
+ rotation = <&imx219>,"rotation:0";
|
|
+ };
|
|
};
|