f07e572f64
bcm2708: boot tested on RPi B+ v1.2 bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G bcm2710: boot tested on RPi 3B v1.2 bcm2711: boot tested on RPi 4B v1.1 4G Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
37 lines
1.5 KiB
Diff
37 lines
1.5 KiB
Diff
From 05ba3df09751ff516de5d862c98f5a979b51bb56 Mon Sep 17 00:00:00 2001
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
Date: Thu, 25 Jun 2020 16:52:14 +0100
|
|
Subject: [PATCH] media: dt-bindings: media: i2c: Add mono version to
|
|
IMX290 bindings
|
|
|
|
The IMX290 module is available as either monochrome or colour and
|
|
the variant is not detectable at runtime.
|
|
|
|
Add a new compatible string for the monochrome version.
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
---
|
|
Documentation/devicetree/bindings/media/i2c/imx290.txt | 7 ++++---
|
|
1 file changed, 4 insertions(+), 3 deletions(-)
|
|
|
|
--- a/Documentation/devicetree/bindings/media/i2c/imx290.txt
|
|
+++ b/Documentation/devicetree/bindings/media/i2c/imx290.txt
|
|
@@ -1,13 +1,14 @@
|
|
* Sony IMX290 1/2.8-Inch CMOS Image Sensor
|
|
|
|
The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with
|
|
-Square Pixel for Color Cameras. It is programmable through I2C and 4-wire
|
|
-interfaces. The sensor output is available via CMOS logic parallel SDR output,
|
|
+Square Pixel for Color or Monochrome Cameras. It is programmable through I2C
|
|
+and 4-wire interfaces.
|
|
+The sensor output is available via CMOS logic parallel SDR output,
|
|
Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2 bus is the
|
|
default. No bindings have been defined for the other busses.
|
|
|
|
Required Properties:
|
|
-- compatible: Should be "sony,imx290"
|
|
+- compatible: Should be "sony,imx290", or "sony,imx290-mono"
|
|
- reg: I2C bus address of the device
|
|
- clocks: Reference to the xclk clock.
|
|
- clock-names: Should be "xclk".
|