f07e572f64
bcm2708: boot tested on RPi B+ v1.2 bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G bcm2710: boot tested on RPi 3B v1.2 bcm2711: boot tested on RPi 4B v1.1 4G Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
52 lines
2.2 KiB
Diff
52 lines
2.2 KiB
Diff
From 047041db91fabcb768c3e5680645b69fa9528e86 Mon Sep 17 00:00:00 2001
|
|
From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
|
|
Date: Thu, 30 Apr 2020 19:40:07 +0200
|
|
Subject: [PATCH] overlays: gpio-shutdown: Add information for SysV
|
|
init / inittab
|
|
|
|
KeyboardSignal and kb::kbrequest can be used to call /sbin/shutdown
|
|
---
|
|
arch/arm/boot/dts/overlays/README | 24 ++++++++++++++++++++++++
|
|
1 file changed, 24 insertions(+)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -847,6 +847,7 @@ Params: gpiopin GPIO for
|
|
Name: gpio-shutdown
|
|
Info: Initiates a shutdown when GPIO pin changes. The given GPIO pin
|
|
is configured as an input key that generates KEY_POWER events.
|
|
+
|
|
This event is handled by systemd-logind by initiating a
|
|
shutdown. Systemd versions older than 225 need an udev rule
|
|
enable listening to the input device:
|
|
@@ -855,6 +856,29 @@ Info: Initiates a shutdown when GPIO p
|
|
SUBSYSTEMS=="platform", DRIVERS=="gpio-keys", \
|
|
ATTRS{keys}=="116", TAG+="power-switch"
|
|
|
|
+ Alternatively this event can be handled also on systems without
|
|
+ systemd, just by traditional SysV init daemon. KEY_POWER event
|
|
+ (keycode 116) needs to be mapped to KeyboardSignal on console
|
|
+ and then kb::kbrequest inittab action which is triggered by
|
|
+ KeyboardSignal from console can be configured to issue system
|
|
+ shutdown. Steps for this configuration are:
|
|
+
|
|
+ Add following lines to the /etc/console-setup/remap.inc file:
|
|
+
|
|
+ # Key Power as special keypress
|
|
+ keycode 116 = KeyboardSignal
|
|
+
|
|
+ Then add following lines to /etc/inittab file:
|
|
+
|
|
+ # Action on special keypress (Key Power)
|
|
+ kb::kbrequest:/sbin/shutdown -t1 -a -h -P now
|
|
+
|
|
+ And finally reload configuration by calling following commands:
|
|
+
|
|
+ # dpkg-reconfigure console-setup
|
|
+ # service console-setup reload
|
|
+ # init q
|
|
+
|
|
This overlay only handles shutdown. After shutdown, the system
|
|
can be powered up again by driving GPIO3 low. The default
|
|
configuration uses GPIO3 with a pullup, so if you connect a
|