a1383655cf
Tested on bcm2710 (Raspberry Pi 3B). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
92 lines
3.4 KiB
Diff
92 lines
3.4 KiB
Diff
From d205110391b7a85af9d45d4e634f1e5595c0a518 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Mon, 26 Nov 2018 19:46:58 +0000
|
|
Subject: [PATCH] net: lan78xx: Support auto-downshift to 100Mb/s
|
|
|
|
Ethernet cables with faulty or missing pairs (specifically pairs C and
|
|
D) allow auto-negotiation to 1000Mbs, but do not support the successful
|
|
establishment of a link. Add a DT property, "microchip,downshift-after",
|
|
to configure the number of auto-negotiation failures after which it
|
|
falls back to 100Mbs. Valid values are 2, 3, 4, 5 and 0, where 0 means
|
|
never downshift.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
|
---
|
|
.../bindings/net/microchip,lan78xx.txt | 3 +++
|
|
drivers/net/phy/microchip.c | 27 +++++++++++++++++++
|
|
include/linux/microchipphy.h | 8 ++++++
|
|
3 files changed, 38 insertions(+)
|
|
|
|
--- a/Documentation/devicetree/bindings/net/microchip,lan78xx.txt
|
|
+++ b/Documentation/devicetree/bindings/net/microchip,lan78xx.txt
|
|
@@ -14,6 +14,9 @@ Optional properties of the embedded PHY:
|
|
- microchip,led-modes: a 0..4 element vector, with each element configuring
|
|
the operating mode of an LED. Omitted LEDs are turned off. Allowed values
|
|
are defined in "include/dt-bindings/net/microchip-lan78xx.h".
|
|
+- microchip,downshift-after: sets the number of failed auto-negotiation
|
|
+ attempts after which the link is downgraded from 1000BASE-T. Should be one of
|
|
+ 2, 3, 4, 5 or 0, where 0 means never downshift.
|
|
|
|
Example:
|
|
|
|
--- a/drivers/net/phy/microchip.c
|
|
+++ b/drivers/net/phy/microchip.c
|
|
@@ -217,6 +217,7 @@ static int lan88xx_probe(struct phy_devi
|
|
struct device *dev = &phydev->mdio.dev;
|
|
struct lan88xx_priv *priv;
|
|
u32 led_modes[4];
|
|
+ u32 downshift_after = 0;
|
|
int len;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
@@ -246,6 +247,32 @@ static int lan88xx_probe(struct phy_devi
|
|
return -EINVAL;
|
|
}
|
|
|
|
+ if (!of_property_read_u32(dev->of_node,
|
|
+ "microchip,downshift-after",
|
|
+ &downshift_after)) {
|
|
+ u32 mask = LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_MASK;
|
|
+ u32 val= LAN78XX_PHY_CTRL3_AUTO_DOWNSHIFT;
|
|
+
|
|
+ switch (downshift_after) {
|
|
+ case 2: val |= LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_2;
|
|
+ break;
|
|
+ case 3: val |= LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_3;
|
|
+ break;
|
|
+ case 4: val |= LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_4;
|
|
+ break;
|
|
+ case 5: val |= LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_5;
|
|
+ break;
|
|
+ case 0: // Disable completely
|
|
+ mask = LAN78XX_PHY_CTRL3_AUTO_DOWNSHIFT;
|
|
+ val = 0;
|
|
+ break;
|
|
+ default:
|
|
+ return -EINVAL;
|
|
+ }
|
|
+ (void)phy_modify_paged(phydev, 1, LAN78XX_PHY_CTRL3,
|
|
+ mask, val);
|
|
+ }
|
|
+
|
|
/* these values can be used to identify internal PHY */
|
|
priv->chip_id = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_ID);
|
|
priv->chip_rev = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_REV);
|
|
--- a/include/linux/microchipphy.h
|
|
+++ b/include/linux/microchipphy.h
|
|
@@ -61,6 +61,14 @@
|
|
/* Registers specific to the LAN7800/LAN7850 embedded phy */
|
|
#define LAN78XX_PHY_LED_MODE_SELECT (0x1D)
|
|
|
|
+#define LAN78XX_PHY_CTRL3 (0x14)
|
|
+#define LAN78XX_PHY_CTRL3_AUTO_DOWNSHIFT (0x0010)
|
|
+#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_MASK (0x000c)
|
|
+#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_2 (0x0000)
|
|
+#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_3 (0x0004)
|
|
+#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_4 (0x0008)
|
|
+#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_5 (0x000c)
|
|
+
|
|
/* DSP registers */
|
|
#define PHY_ARDENNES_MMD_DEV_3_PHY_CFG (0x806A)
|
|
#define PHY_ARDENNES_MMD_DEV_3_PHY_CFG_ZD_DLY_EN_ (0x2000)
|