Openwrt/target/linux/ramips/dts/MAC1200RV2.dts
Alex Maclean 6031ab345d ramips: move partitions into partition table node
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2018-08-04 08:39:35 +02:00

105 lines
1.6 KiB
Plaintext

/dts-v1/;
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "mercury,mac1200r-v2", "mediatek,mt7628an-soc";
model = "Mercury MAC1200R v2";
aliases {
led-status = &led_status;
};
chosen {
bootargs = "console=ttyS0,57600";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x2000000>;
};
gpio-leds {
compatible = "gpio-leds";
led_status: status {
label = "mac1200rv2:green:status";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0 0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x1d800>;
};
factory: partition@1d800 {
label = "factory_info";
reg = <0x1d800 0x800>;
read-only;
};
art: partition@1e000 {
label = "art";
reg = <0x1e000 0x2000>;
read-only;
};
partition@20000 {
label = "config";
reg = <0x20000 0x10000>;
};
partition@30000 {
label = "u-boot2";
reg = <0x30000 0x10000>;
};
partition@40000 {
label = "firmware";
reg = <0x40000 0x7c0000>;
};
};
};
};
&ethernet {
pinctrl-names = "default";
mtd-mac-address = <&factory 0xd>;
mediatek,portmap = "llllw";
};
&wmac {
status = "okay";
ralink,mtd-eeprom = <&art 0x0>;
};
&pcie {
status = "okay";
};
&pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&art 0x1000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};