db91418766
TP-Link RE350K v1 (FCC ID: TE7RE350K) is a wall-plug AC1200 Wi-Fi range extender with 'Kasa Smart' support. Device is based on Qualcomm/Atheros QCA9558 + QCA9882 + AR8035 platform and is available only on US market. Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of flash (SPI NOR) - 1x 1 Gbps Ethernet (AR8035) - 2T2R 2.4 GHz (QCA9558), with ext. PA (SE2565T) and LNA (SKY65971-11) - 2T2R 5 GHz (QCA9882), with ext. PA (SE5003L1-R) and LNA (SKY65981-11) - 2x U.FL connector on PCB - 2x dual-band PCB antennas - 1x LED, 2x dual-color LED (all driven by GPIO) - 3x button (app config, led, reset) - 1x mechanical on/off slide switch - 1x UART (4-pin, 2.54 mm pitch) header on PCB - 1x JTAG (8-pin, 1.27 mm pitch) header on PCB Flash instruction: Use 'factory' image directly in vendor GUI (default IP: 192.168.0.254, default credentials: admin/admin). Warning: This device does not include any kind of recovery mechanism in U-Boot. Vendor firmware access: You can access vendor firmware over serial (RX line requires jumper resistor in R306 place, near XTAL) with: root/sohoadmin credentials. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> |
||
---|---|---|
.. | ||
autoconf | ||
automake | ||
b43-tools | ||
bc | ||
bison | ||
ccache | ||
cmake | ||
coreutils | ||
dosfstools | ||
e2fsprogs | ||
elftosb | ||
expat | ||
findutils | ||
firmware-utils | ||
flex | ||
flock | ||
genext2fs | ||
gengetopt | ||
gmp | ||
include | ||
isl | ||
kernel2minor | ||
libelf | ||
libressl | ||
libtool | ||
lzma | ||
lzma-old | ||
m4 | ||
make-ext4fs | ||
missing-macros | ||
mkimage | ||
mklibs | ||
mm-macros | ||
mpc | ||
mpfr | ||
mtd-utils | ||
mtools | ||
padjffs2 | ||
patch | ||
patch-image | ||
patchelf | ||
pkg-config | ||
qemu | ||
quilt | ||
scons | ||
sdimage | ||
sed | ||
sparse | ||
squashfs | ||
squashfskit4 | ||
sstrip | ||
tar | ||
upslug2 | ||
wrt350nv2-builder | ||
xz | ||
zip | ||
zlib | ||
Makefile |