Openwrt

Openwrt build for Asrock G10 Router

Go to file

Hauke Mehrtens 5caee877dc brcm47xx: increase max image size the trx utile uses a maximum image size of 7.2MB. There are brcm47xx devices even with serial flash with bigger flash chips, but OpenWrt was not able to create images for these devices. This patch provides an additional parameter which increases this limit to 32 MB. There is a warning in the trx utile code which suggests that bigger images could overwrite the nvram partition on some devices, but normally the program writing the image should make sure that it is safe to write it to the flash. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 46872		2015-09-11 17:55:28 +00:00
config
docs
include
package
scripts
target	brcm47xx: increase max image size	2015-09-11 17:55:28 +00:00
toolchain	musl: add a hack to remove unused crypt() algorithms, saves ~14k after lzma	2015-09-08 10:57:11 +00:00
tools
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore
BSDmakefile
Config.in
feeds.conf.default	feeds.conf.default: add new targets feed	2015-03-19 11:58:35 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile
README	Add 'subversion' build dependency to README	2014-08-31 12:06:32 +00:00
rules.mk	rules.mk: remove GCC 4.4 and GCC 4.5 conditional	2015-08-25 07:45:42 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org