Openwrt

Openwrt build for Asrock G10 Router

Go to file

John Crispin 59acb0b8f4 scripts: fix getver git dir check Git internals are referenced by .git which isn't necessarily a directory. It may also be a file that references the actual .git directory using the gitdir directive. If .git is assumed to be a directory the build will not be able to get the correct version when openwrt is included as a git submodule because when used as a submodule .git will actually be a file referencing to a subdirectory in the parent's git dir. When the correct version is not detected some image generation tools will fail because the OpenWrt string will be 'OpenWrtunknown' which is too long for some header formats. Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 44452		2015-02-14 20:48:37 +00:00
config	config: disable kernel tracing on uml	2015-02-11 11:31:26 +00:00
docs
include	fix typo	2015-02-14 12:21:34 +00:00
package	uci-defaults: add ucidef_set_led_mmc	2015-02-14 20:47:58 +00:00
scripts	scripts: fix getver git dir check	2015-02-14 20:48:37 +00:00
target	lantiq: disable buffered writes on Intel command set flash	2015-02-14 20:48:32 +00:00
toolchain	toolchain/gcc: fix an ICE on ARM (PR58595)	2015-02-11 11:30:56 +00:00
tools	tools: add patchelf host build	2015-02-10 15:48:32 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk	rules.mk: don't add staging_dir/host/bin/ path again	2015-02-10 15:49:36 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org