bfbdeeb3de
Linksys WRT32X (Venom) is identical in hardware to the WRT3200ACM with a different flash layout and boots zImage rather than uImage. Specification: - Marvell Armada 385 88F6820 (2x 1.8GHz) - 256MB of Flash - 512MB of RAM - 2.4GHz (bgn) and 5GHz (an+ac wave 2) - 4x 1Gbps LAN + 1x 1Gbps WAN - 1x USB 3.0 and 1x USB 2.0/eSATA (combo port) Flash instruction: Apply factory image via web-gui. Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
80 lines
1.9 KiB
Bash
80 lines
1.9 KiB
Bash
#
|
|
# Copyright (C) 2014-2015 OpenWrt.org
|
|
#
|
|
|
|
linksys_get_target_firmware() {
|
|
cur_boot_part=`/usr/sbin/fw_printenv -n boot_part`
|
|
target_firmware=""
|
|
if [ "$cur_boot_part" = "1" ]
|
|
then
|
|
# current primary boot - update alt boot
|
|
target_firmware="kernel2"
|
|
fw_setenv boot_part 2
|
|
fw_setenv bootcmd "run altnandboot"
|
|
elif [ "$cur_boot_part" = "2" ]
|
|
then
|
|
# current alt boot - update primary boot
|
|
target_firmware="kernel1"
|
|
fw_setenv boot_part 1
|
|
fw_setenv bootcmd "run nandboot"
|
|
fi
|
|
|
|
# re-enable recovery so we get back if the new firmware is broken
|
|
fw_setenv auto_recovery yes
|
|
|
|
echo "$target_firmware"
|
|
}
|
|
|
|
linksys_get_root_magic() {
|
|
(get_image "$@" | dd skip=786432 bs=4 count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null
|
|
}
|
|
|
|
platform_do_upgrade_linksys() {
|
|
local magic_long="$(get_magic_long "$1")"
|
|
|
|
mkdir -p /var/lock
|
|
local part_label="$(linksys_get_target_firmware)"
|
|
touch /var/lock/fw_printenv.lock
|
|
|
|
if [ ! -n "$part_label" ]
|
|
then
|
|
echo "cannot find target partition"
|
|
exit 1
|
|
fi
|
|
|
|
local target_mtd=$(find_mtd_part $part_label)
|
|
|
|
[ "$magic_long" = "73797375" ] && {
|
|
CI_KERNPART="$part_label"
|
|
if [ "$part_label" = "kernel1" ]
|
|
then
|
|
CI_UBIPART="rootfs1"
|
|
else
|
|
CI_UBIPART="rootfs2"
|
|
fi
|
|
|
|
nand_upgrade_tar "$1"
|
|
}
|
|
[ "$magic_long" = "27051956" -o "$magic_long" = "0000a0e1" ] && {
|
|
# check firmwares' rootfs types
|
|
local target_mtd=$(find_mtd_part $part_label)
|
|
local oldroot="$(linksys_get_root_magic $target_mtd)"
|
|
local newroot="$(linksys_get_root_magic "$1")"
|
|
|
|
if [ "$newroot" = "55424923" -a "$oldroot" = "55424923" ]
|
|
# we're upgrading from a firmware with UBI to one with UBI
|
|
then
|
|
# erase everything to be safe
|
|
mtd erase $part_label
|
|
get_image "$1" | mtd -n write - $part_label
|
|
else
|
|
get_image "$1" | mtd write - $part_label
|
|
fi
|
|
}
|
|
}
|
|
|
|
platform_copy_config_linksys() {
|
|
cp -f /tmp/sysupgrade.tgz /tmp/syscfg/sysupgrade.tgz
|
|
sync
|
|
}
|