Openwrt

Openwrt build for Asrock G10 Router

Go to file

Gabor Juhos 575a5286c8 ramips: use lowercase partiion names on the WCR150GN board SVN-Revision: 27387		2011-07-03 15:01:53 +00:00
docs
include	generic: use padjffs2 in prepare_generic_squashfs	2011-07-02 08:37:58 +00:00
package	swconfig: make reset and enable_vlan default to 1 (based on patch by Nikolay Martynov)	2011-07-03 04:20:18 +00:00
scripts	download.pl: cope with potential two-digit linux versions	2011-07-03 15:00:24 +00:00
target	ramips: use lowercase partiion names on the WCR150GN board	2011-07-03 15:01:53 +00:00
toolchain	eglibc: remove old versions	2011-07-02 09:47:00 +00:00
tools	tools: always build mpc, now that older gcc versions have been eliminated, fixes #9642	2011-07-02 10:49:15 +00:00
.gitignore	add vim temp files (*~) to .gitignore	2011-04-29 15:11:57 +00:00
BSDmakefile
Config.in	add a kernel config option for magic sysrq	2011-03-17 23:14:12 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk	rules.mk: properly populate $(LIBGCC_S) for external toolchains	2011-04-11 16:06:46 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org