Openwrt

Openwrt build for Asrock G10 Router

Go to file

Felix Fietkau 5745e536d4 madwifi: napi polling fix - fix u_int negative comparison - add some reserve for polling packets (ff has two frames in one descriptor) SVN-Revision: 12280		2008-08-11 14:36:50 +00:00
docs	Support encrypted WDS connections (#2463 )	2008-08-09 00:18:25 +00:00
include	Package ip6t_limit and ip6t_frag for 2.4 kernels (#3760 )	2008-08-11 06:38:48 +00:00
package	madwifi: napi polling fix - fix u_int negative comparison - add some reserve for polling packets (ff has two frames in one descriptor)	2008-08-11 14:36:50 +00:00
scripts	scripts/feeds calls 'make' irrespective of the platform it is running on. The attached patch changes the code to use gmake if available (which should cover non-linux platforms, and is the same logic used to adapt other programs in include/host.mk) (#3867 )	2008-08-08 21:30:08 +00:00
target	Package ip6t_limit and ip6t_frag for 2.4 kernels (#3760 )	2008-08-11 06:38:48 +00:00
toolchain	storm is ARMv4, not ARMv4T (thx, SeG)	2008-07-31 16:51:43 +00:00
tools	Invert logic, first search for find as most people will build under Linux	2008-08-08 21:48:15 +00:00
.gitignore	add missing gitignore change for build environments	2008-08-06 14:34:18 +00:00
BSDmakefile
Config.in	adds missing patch for native toolchain	2008-06-10 07:18:41 +00:00
feeds.conf	update luci feed url to use http due to certificate issues	2008-08-07 13:26:10 +00:00
LICENSE
Makefile	make package prereq checks behave more like build prereq checks (first check all, then fail if necessary), also make them less verbose	2008-08-04 23:15:17 +00:00
README
rules.mk	add a variable that contains the proper architecture-dependent -fPIC/-fpic cflag for building shared libraries	2008-08-06 22:10:20 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org