Openwrt

Openwrt build for Asrock G10 Router

Go to file

Florian Fainelli 565a1e4ea3 add missing 2.6.35 config symbols SVN-Revision: 22537		2010-08-08 20:00:28 +00:00
docs
include	Add kernel_nconfig make target	2010-08-06 21:36:35 +00:00
package	uci: Install ucimap.h into the staging dir	2010-08-08 19:37:09 +00:00
scripts
target	add missing 2.6.35 config symbols	2010-08-08 20:00:28 +00:00
toolchain	nptl-supoprt should not autoselect EXTRA_WARNINGS as this results in extra CFLAGS which may not be supported by older compilers (as e.g. gcc-4.1 which e.g. the x86 target is currently using)	2010-08-06 12:42:04 +00:00
tools	brcm47xx: Add new image generation and fix leds/reset button on WNR834B V2	2010-08-06 20:21:32 +00:00
.gitignore
BSDmakefile
Config.in	fix typo	2010-08-01 14:37:19 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org