Openwrt build for Asrock G10 Router
Go to file
Hauke Mehrtens 5291e389ca cloog: libtools has to be run
SVN-Revision: 24681
2010-12-18 19:34:55 +00:00
docs docs: fix a counting fail 2010-05-29 13:11:48 +00:00
include autotools.mk: remove HOST_BUILD_DEPENDS on libtool 2010-12-18 18:14:25 +00:00
package opkg: remove stray HOST_BUILD_DEPENDS 2010-12-18 19:16:03 +00:00
scripts deptest: Also accept stamps that are broken links. 2010-12-08 16:08:14 +00:00
target generic: fix min/max confusion in jffs2_sum_init on 2.6.32 2010-12-17 20:34:26 +00:00
toolchain upgrade the linaro gcc to the 2010.12 release 2010-12-14 09:50:59 +00:00
tools cloog: libtools has to be run 2010-12-18 19:34:55 +00:00
.gitignore .gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default 2010-12-04 10:27:13 +00:00
BSDmakefile
Config.in remove 2.6.25 support 2010-11-22 13:43:32 +00:00
feeds.conf.default switch to LuCI trunk, should be stable enough for common use now 2010-11-16 00:05:41 +00:00
LICENSE
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 2010-09-01 17:51:36 +00:00
README
rules.mk - implement hooks for hostbuilds - use host build hooks to implement fixups for host build - move separator declaration to rules.mk 2010-12-13 19:04:33 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org