Openwrt

Openwrt build for Asrock G10 Router

Go to file

Mathias Kresin 51bca43f39 ramips: fix edimax 6200nl switch config With `3a9752bbd2` and later changes to ramips_set_preinit_iface() the default vlan config applied during preinit was changed. These changes were made without updating the default network config to ensure that vlan interfaces used for lan/wan are still configured. Fix the issue by using the default all LAN portmap and disabling not connected switch ports using portdisable device tree parameter. Signed-off-by: Mathias Kresin <dev@kresin.me>		2016-10-15 09:01:45 +02:00
.github	Add Issue submission template (redirect to bugs.lede-project.org)	2016-09-01 09:01:04 -04:00
config	config: enable shadow passwords unconditionally	2016-09-26 17:57:56 +02:00
docs
include	autotools: use correct version for gettext FIXUP	2016-10-13 20:25:42 +02:00
package	mbedtls: enable NIST curves optimisation.	2016-10-13 20:25:42 +02:00
scripts	scripts/diffconfig.sh: fix output if TARGET_PER_DEVICE_ROOTFS is set	2016-10-06 22:00:10 +02:00
target	ramips: fix edimax 6200nl switch config	2016-10-15 09:01:45 +02:00
toolchain	toolchain/binutils: Add binutils 2.27	2016-10-13 17:05:25 +02:00
tools	tools: add missing dependency for dosfstools	2016-10-12 12:25:27 +02:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default	feeds: switch from github to lede-project.org mirrors	2016-08-01 22:34:18 +02:00
LICENSE
Makefile	build: move merged package directory from bin/ to staging_dir	2016-08-03 12:22:18 +02:00
README
rules.mk

README

This is the buildsystem for the LEDE Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your LEDE Community
	http://www.lede-project.org