Openwrt build for Asrock G10 Router
Go to file
2011-03-08 07:51:06 +00:00
docs
include site: cache ac_cv_func_malloc_0_nonnull and ac_cv_func_realloc_0_nonnull 2011-03-08 06:00:56 +00:00
package madwifi: fix logic error in r25929 2011-03-07 19:21:25 +00:00
scripts base-files: relink uclibc and libgcc libraries to remove leftovers of the statically linked initial libgcc saves a few kb and gets rid of unused not exported functions as well should also improve the reliability of mklibs 2011-03-01 05:40:38 +00:00
target n810: Add workaround for bluetooth IRQ issue 2011-03-07 16:57:15 +00:00
toolchain upgrade to the 2011.03-0 release from Linaro 2011-03-08 07:51:06 +00:00
tools bison: fix compilation with stub intl header 2011-03-04 20:37:15 +00:00
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk only support EABI on ARM targets 2011-03-07 12:59:19 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org