Openwrt

Openwrt build for Asrock G10 Router

Go to file

John Crispin 4a7d620950 scanning kernel packages for targets Any modifications in target/linux/*/modules.mk would not come into effect for subsequent "make menuconfig" unless we delete ./tmp. Signed-off-by: kalyan <kalyanatejaswi@gmail.com> SVN-Revision: 31442		2012-04-23 09:37:50 +00:00
docs
include	kernel: update linux 3.3 to 3.3.2	2012-04-17 12:51:02 +00:00
package	scanning kernel packages for targets	2012-04-23 09:37:50 +00:00
scripts	allow arbitary folder layout when using localmirrors	2012-04-10 14:11:45 +00:00
target	ar8216: enable forwarding of multicast frames to the cpu port on ar8327 (thx, SeG)	2012-04-22 19:19:49 +00:00
toolchain	remove screwed up patch for gcc 4.7-linaro which got committed by accident	2012-04-21 10:23:49 +00:00
tools	tools: add xz dependency to automake	2012-04-21 16:09:04 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile
Config.in	make xz ramdisk images also available for 2.6.39+	2012-04-18 15:14:05 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
LICENSE
Makefile	abort built in prereq target if there is no site config file for the current target	2012-01-19 12:19:28 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
rules.mk	Use build suffix on build_dir paths	2012-04-10 10:55:55 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org