Openwrt

Openwrt build for Asrock G10 Router

Go to file

John Crispin 4a4c324cd2 mtd: fix reading of image magic bytes in smaller chunks The image_check currently fails when it cannot read all magic bytes in a single chunk. But this can happen when the data are read from a pipe. This currently breaks the openmesh.sh upgrade script with musl because it uses dd with a blocksize of 1 to copy the image file to the mtd process. The read can simply be repeated until enough bytes are read for the magic byte check. It only stops when either an error was returned or 0 bytes were read. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 48891		2016-03-03 20:24:38 +00:00
config
docs
include	kernel: update kernel 3.18 to version 3.18.27	2016-03-01 23:16:17 +00:00
package	mtd: fix reading of image magic bytes in smaller chunks	2016-03-03 20:24:38 +00:00
scripts	scripts/download.pl: fix sha256 hash command (#21931 )	2016-02-27 16:20:06 +00:00
target	ramips: enable mt76 on mt7688 by default	2016-03-02 17:40:58 +00:00
toolchain	gcc: update gcc 5 to version 5.3.0	2016-02-29 20:09:45 +00:00
tools	ramips: Add a tool to create JCG factory images	2016-03-03 20:24:30 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org