Openwrt

Openwrt build for Asrock G10 Router

Go to file

Michal Cieslakiewicz 4a0a1fc91c mac80211: ath9k: add GPIO mask dts property This patch adds 'qca,gpio-mask=<u32>' device tree property to ath9k node. This optional setting is a hack and should only be used in very special (and rare) cases when a button or LED is wired to a GPIO pin normally masked out (due to being one-way etc). Netgear WNDR4300 v2 is one such example - it uses GPI9 for RFKILL. See ath9k/reg.h *_GPIO_MASK constants. Use with caution and expect to see stream of kernel warnings if wrong mask value is provided. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>		2020-01-15 20:55:31 +01:00
.github
config	buildsystem: Make PIE ASLR option tristate	2020-01-13 15:34:36 +01:00
include	build: define check-kernel-size to remove unflashable images	2020-01-15 20:05:48 +01:00
package	mac80211: ath9k: add GPIO mask dts property	2020-01-15 20:55:31 +01:00
scripts	scripts/arm-magic.sh: switch to /bin/sh	2020-01-02 23:59:20 +01:00
target	ath79: add support for D-Link DIR-505	2020-01-15 20:38:46 +01:00
toolchain	toolchain/gcc: Backport patch to fix unconditional MULTIARCH_DIRNAME	2019-12-23 00:04:18 +01:00
tools	wrt350nv2-builder: Fix memory leak	2020-01-14 17:48:50 +01:00
.gitattributes
.gitignore	gitignore: ignore patches in OpenWrt root directory	2019-11-06 00:27:55 +01:00
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile	build: add buildinfo as single Makefile target	2019-10-17 14:01:33 +02:00
README
rules.mk	rules.mk: remove "$(STAGING_DIR)/include"	2019-11-02 20:51:56 +01:00

README

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org