Openwrt build for Asrock G10 Router
Go to file
John Crispin 4925f710f6 relayd: update to latest git head
this fixes multicast fowarding on relayd links

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41254
2014-06-18 10:08:05 +00:00
config Disable crashlog for UML 2014-06-12 11:34:44 +00:00
docs
include include/target.mk: add CPU_CFLAGS_octeon 2014-06-18 10:07:49 +00:00
package relayd: update to latest git head 2014-06-18 10:08:05 +00:00
scripts scripts/metadata.pl: avoid adding depends and select for the same symbol 2014-06-12 14:35:09 +00:00
target octeon: fix up the cpu flags 2014-06-18 10:08:01 +00:00
toolchain toolchain: use different defaults for octeon 2014-06-18 10:07:53 +00:00
tools lantiq: DGN3500 (all known variants) factory and sysupgrade image building support 2014-06-17 15:38:54 +00:00
.gitattributes
.gitignore add git-src to .gitignore 2014-01-12 12:06:39 +00:00
BSDmakefile
Config.in
feeds.conf.default feeds.conf.default: add management feed 2014-06-12 15:08:08 +00:00
LICENSE
Makefile build: remove duplicate variable definitions 2014-03-21 15:54:11 +00:00
README
rules.mk partially revert "build: remove check for nonexistant CONFIG_TAR_VERBOSITY variable and move TAR_OPTIONS to unpack.mk" 2014-03-22 19:52:48 +00:00

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org