Openwrt

Openwrt build for Asrock G10 Router

Go to file

Nicolas Thill 4702698c68 add a config option to select the binary stripping method to use (between none, strip & sstrip) SVN-Revision: 16728		2009-07-07 02:34:58 +00:00
docs	configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450 )	2009-07-05 11:17:49 +00:00
include	bump to 2.6.29.6 and refresh patches	2009-07-05 15:08:56 +00:00
package	fix wprobe-export	2009-07-07 02:22:46 +00:00
scripts	Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason.	2009-06-08 21:17:58 +00:00
target	Add config file for 2.6.31 kernels in preparation for 2.6.31	2009-07-06 11:48:56 +00:00
toolchain	add a config option to select the binary stripping method to use (between none, strip & sstrip)	2009-07-07 02:34:58 +00:00
tools	fix segfault when using the maxlen argument (#4359 )	2009-07-01 14:58:15 +00:00
.gitignore	add logs/ to .gitignore	2009-04-24 01:04:57 +00:00
BSDmakefile
Config.in	add a config option to select the binary stripping method to use (between none, strip & sstrip)	2009-07-07 02:34:58 +00:00
feeds.conf.default	switch to LuCI 0.9.x branch	2009-06-10 23:55:19 +00:00
LICENSE
Makefile	add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	2009-05-28 18:40:37 +00:00
README
rules.mk	add a config option to select the binary stripping method to use (between none, strip & sstrip)	2009-07-07 02:34:58 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org