Openwrt/target/linux/brcm63xx/dts/bcm6358.dtsi
Jonas Gorski a3384088a2 brcm63xx: add uart nodes
Now that we can register uarts through device-tree, add them to the dtsi
files.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-12-16 12:57:05 +01:00

204 lines
3.9 KiB
Plaintext

/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "brcm,bcm6358";
aliases {
pflash = &pflash;
pinctrl = &pinctrl;
serial0 = &uart0;
serial1 = &uart1;
spi0 = &lsspi;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "brcm,bmips4350", "mips,mips4Kc";
device_type = "cpu";
reg = <0>;
};
cpu@1 {
compatible = "brcm,bmips4350", "mips,mips4Kc";
device_type = "cpu";
reg = <1>;
};
};
cpu_intc: interrupt-controller {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
interrupt-controller;
#interrupt-cells = <1>;
};
memory { device_type = "memory"; reg = <0 0>; };
pflash: nor@1e000000 {
compatible = "cfi-flash";
reg = <0x1e000000 0x2000000>;
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
ubus@fff00000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
interrupt-parent = <&periph_intc>;
periph_intc: interrupt-controller@fffe000c {
compatible = "brcm,bcm6345-l1-intc";
reg = <0xfffe000c 0x8>,
<0xfffe0038 0x8>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpu_intc>;
interrupts = <2>, <3>;
};
ext_intc0: interrupt-controller@fffe0014 {
compatible = "brcm,bcm6345-ext-intc";
reg = <0xfffe0014 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <25>, <26>, <27>, <28>;
};
ext_intc1: interrupt-controller@fffe001c {
compatible = "brcm,bcm6345-ext-intc";
reg = <0xfffe001c 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <20>, <21>;
};
pinctrl: pin-controller@fffe0080 {
compatible = "brcm,bcm6358-pinctrl";
reg = <0xfffe0080 0x8>,
<0xfffe0088 0x8>;
reg-names = "dirout", "dat", "mode";
brcm,gpiomode = <&gpiomode>;
gpio-controller;
#gpio-cells = <2>;
interrupts-extended = <&ext_intc1 0 0>,
<&ext_intc1 1 0>,
<&ext_intc0 0 0>,
<&ext_intc0 1 0>,
<&ext_intc0 2 0>,
<&ext_intc0 3 0>;
interrupt-names = "gpio32", "gpio33", "gpio34", "gpio35",
"gpio36", "gpio37";
pinctrl_ebi_cs: ebi_cs {
function = "ebi_cs";
groups = "ebi_cs_grp";
};
pinctrl_uart1: uart1 {
function = "uart1";
groups = "uart1_grp";
};
pinctrl_serial_led: serial_led {
function = "serial_led";
groups = "serial_led_grp";
};
pinctrl_legacy_led: legacy_led {
function = "legacy_led";
groups = "legacy_led_grp";
};
pinctrl_led: led {
function = "led";
groups = "led_grp";
};
pinctrl_spi_cs_23: spi_cs {
function = "spi_cs";
groups = "spi_cs_grp";
};
pinctrl_utopia: utopia {
function = "utopia";
groups = "utopia_grp";
};
pinctrl_pwm_syn_clk: pwm_syn_clk {
function = "pwm_syn_clk";
groups = "pwm_syn_clk_grp";
};
pinctrl_sys_irq: sys_irq {
function = "sys_irq";
groups = "sys_irq_grp";
};
};
gpiomode: gpiomode@fffe0098 {
compatible = "brcm,bcm6358-gpiomode", "syscon";
reg = <0xfffe0098 0x4>;
};
leds: led-controller@fffe00d0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "brcm,bcm6358-leds";
reg = <0xfffe00d0 0x8>;
status = "disabled";
};
uart0: serial@fffe0100 {
compatible = "brcm,bcm6345-uart";
reg = <0xfffe0100 0x18>;
interrupt-parent = <&periph_intc>;
interrupts = <2>;
/* clocks = <&periph_clk>; */
/* clock-names = "refclk"; */
status = "disabled";
};
uart1: serial@fffe0120 {
compatible = "brcm,bcm6345-uart";
reg = <0xfffe0120 0x18>;
interrupt-parent = <&periph_intc>;
interrupts = <3>;
/* clocks = <&periph_clk>; */
/* clock-names = "refclk"; */
status = "disabled";
};
lsspi: spi@fffe0800 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "brcm,bcm6358-spi";
reg = <0xfffe0800 0x70c>;
interrupts = <1>;
/* clocks = <&clkctl 9>; */
};
};
};