Openwrt/target/linux/oxnas/files/arch/arm/boot/dts/ox820-cloudengines-pogoplugpro.dts
Sungbo Eo 9e129c9d95 oxnas: enable sata on Pogoplug V3/Pro
Pogoplug V3/Pro has an interanl SATA port. To use it, DTS sata node should be
enabled, and kmod-ata-oxnas-sata package needs to be installed.

Fixes: FS#2542

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2020-03-17 17:36:34 +09:00

132 lines
2.0 KiB
Plaintext

/*
* cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3
*
* Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
*
* Licensed under GPLv2 or later
*/
/dts-v1/;
#include "ox820.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Cloud Engines PogoPlug Pro";
compatible = "cloudengines,pogoplugpro", "oxsemi,ox820";
chosen {
bootargs = "earlyprintk console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
memory {
/* 128Mbytes DDR */
reg = <0x60000000 0x8000000>;
};
aliases {
serial0 = &uart0;
gpio0 = &gpio0;
gpio1 = &gpio1;
led-boot = &led_status;
led-failsafe = &led_warn;
led-running = &led_act;
led-upgrade = &led_warn;
};
leds {
compatible = "gpio-leds";
led_status: blue {
label = "pogoplug:blue";
gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
led_warn: orange {
label = "pogoplug:orange";
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
led_act: green {
label = "pogoplug:green";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
};
};
&uart0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
};
&nandc {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
nand@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
nand-ecc-mode = "soft";
nand-ecc-algo = "hamming";
partition@0 {
label = "stage1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition@40000 {
label = "u-boot";
reg = <0x00040000 0x00380000>;
read-only;
};
partition@3c0000 {
label = "u-boot-env";
reg = <0x003c0000 0x00080000>;
};
partition@440000 {
label = "kernel";
reg = <0x00440000 0x009c0000>;
};
partition@e00000 {
label = "ubi";
reg = <0x00e00000 0x07200000>;
};
};
};
&ehci {
status = "okay";
};
&etha {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_etha_mdio>;
};
&sata {
status = "okay";
};
&pcie_phy {
status = "okay";
};
&pcie0 {
status = "okay";
};