15167671b0
As patches for the AR8031/AR8033 copper page selection were merged upstream, we can backport these patches. This also fixes a PHY capabilities detection issue on the Ubiquiti ER-X-SFP. Signed-off-by: David Bauer <mail@david-bauer.net>
74 lines
2.3 KiB
Diff
74 lines
2.3 KiB
Diff
From 8f7e876273e294b732b42af2e5e6bba91d798954 Mon Sep 17 00:00:00 2001
|
|
From: Michael Walle <michael@walle.cc>
|
|
Date: Tue, 20 Apr 2021 12:29:29 +0200
|
|
Subject: [PATCH] net: phy: at803x: fix probe error if copper page is selected
|
|
|
|
The commit c329e5afb42f ("net: phy: at803x: select correct page on
|
|
config init") selects the copper page during probe. This fails if the
|
|
copper page was already selected. In this case, the value of the copper
|
|
page (which is 1) is propagated through phy_restore_page() and is
|
|
finally returned for at803x_probe(). Fix it, by just using the
|
|
at803x_page_write() directly.
|
|
|
|
Also in case of an error, the regulator is not disabled and leads to a
|
|
WARN_ON() when the probe fails. This couldn't happen before, because
|
|
at803x_parse_dt() was the last call in at803x_probe(). It is hard to
|
|
see, that the parse_dt() actually enables the regulator. Thus move the
|
|
regulator_enable() to the probe function and undo it in case of an
|
|
error.
|
|
|
|
Fixes: c329e5afb42f ("net: phy: at803x: select correct page on config init")
|
|
Signed-off-by: Michael Walle <michael@walle.cc>
|
|
Reviewed-by: David Bauer <mail@david-bauer.net>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
drivers/net/phy/at803x.c | 23 +++++++++++++++++------
|
|
1 file changed, 17 insertions(+), 6 deletions(-)
|
|
|
|
--- a/drivers/net/phy/at803x.c
|
|
+++ b/drivers/net/phy/at803x.c
|
|
@@ -527,10 +527,6 @@ static int at803x_parse_dt(struct phy_de
|
|
phydev_err(phydev, "failed to get VDDIO regulator\n");
|
|
return PTR_ERR(priv->vddio);
|
|
}
|
|
-
|
|
- ret = regulator_enable(priv->vddio);
|
|
- if (ret < 0)
|
|
- return ret;
|
|
}
|
|
|
|
return 0;
|
|
@@ -552,15 +548,30 @@ static int at803x_probe(struct phy_devic
|
|
if (ret)
|
|
return ret;
|
|
|
|
+ if (priv->vddio) {
|
|
+ ret = regulator_enable(priv->vddio);
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
/* Some bootloaders leave the fiber page selected.
|
|
* Switch to the copper page, as otherwise we read
|
|
* the PHY capabilities from the fiber side.
|
|
*/
|
|
if (at803x_match_phy_id(phydev, ATH8031_PHY_ID)) {
|
|
- ret = phy_select_page(phydev, AT803X_PAGE_COPPER);
|
|
- ret = phy_restore_page(phydev, AT803X_PAGE_COPPER, ret);
|
|
+ phy_lock_mdio_bus(phydev);
|
|
+ ret = at803x_write_page(phydev, AT803X_PAGE_COPPER);
|
|
+ phy_unlock_mdio_bus(phydev);
|
|
+ if (ret)
|
|
+ goto err;
|
|
}
|
|
|
|
+ return 0;
|
|
+
|
|
+err:
|
|
+ if (priv->vddio)
|
|
+ regulator_disable(priv->vddio);
|
|
+
|
|
return ret;
|
|
}
|
|
|