07c49462ad
Netgear DGND3700v2 / Comtrend VR-3032u internal wireless not supported. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
260 lines
7.2 KiB
Makefile
260 lines
7.2 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
KERNEL_LOADADDR := 0x80010000 # RAM start + 64K
|
|
LOADER_ENTRY := 0x80a00000 # RAM start + 10M, for relocate
|
|
RAMSIZE := 0x02000000 # 32MB
|
|
LZMA_TEXT_START := 0x81800000 # 32MB - 8MB
|
|
|
|
DEVICE_VARS += CHIP_ID DEVICE_LOADADDR
|
|
|
|
define Build/Compile
|
|
rm -rf $(KDIR)/relocate
|
|
$(CP) ../../generic/image/relocate $(KDIR)
|
|
$(MAKE) -C $(KDIR)/relocate \
|
|
CACHELINE_SIZE=16 \
|
|
CROSS_COMPILE=$(TARGET_CROSS) \
|
|
KERNEL_ADDR=$(KERNEL_LOADADDR) \
|
|
LZMA_TEXT_START=$(LOADER_ENTRY)
|
|
endef
|
|
|
|
### Kernel scripts ###
|
|
define Build/loader-lzma
|
|
@rm -rf $@.src
|
|
$(MAKE) -C lzma-loader \
|
|
CHIP_ID=$(CHIP_ID) \
|
|
KERNEL_ADDR=$(KERNEL_LOADADDR) \
|
|
KDIR=$(KDIR) \
|
|
LOADER_ADDR=$(if $(DEVICE_LOADADDR),$(DEVICE_LOADADDR),$(LOADER_ENTRY)) \
|
|
LOADER_DATA="$@" \
|
|
LOADER_NAME="$(notdir $@)" \
|
|
LZMA_TEXT_START=$(LZMA_TEXT_START) \
|
|
PKG_BUILD_DIR="$@.src" \
|
|
RAMSIZE=$(RAMSIZE) \
|
|
TARGET_DIR="$(dir $@)" \
|
|
compile loader.$(1)
|
|
@mv "$@.$(1)" "$@"
|
|
@rm -rf $@.src
|
|
endef
|
|
|
|
define Build/lzma-cfe
|
|
# CFE is a LZMA nazi! It took me hours to find out the parameters!
|
|
# Also I think lzma has a bug cause it generates different output depending on
|
|
# if you use stdin / stdout or not. Use files instead of stdio here, cause
|
|
# otherwise CFE will complain and not boot the image.
|
|
$(call Build/lzma-no-dict,-d22 -fb64 -a1)
|
|
# Strip out the length, CFE doesn't like this
|
|
dd if=$@ of=$@.new bs=5 count=1
|
|
dd if=$@ of=$@.new ibs=13 obs=5 skip=1 seek=1 conv=notrunc
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
define Build/relocate-kernel
|
|
# CFE only allows ~4 MiB for the uncompressed kernels, but uncompressed
|
|
# kernel might get larger than that, so let CFE unpack and load at a
|
|
# higher address and make the kernel relocate itself to the expected
|
|
# location.
|
|
( \
|
|
dd if=$(KDIR)/relocate/loader.bin bs=32 conv=sync && \
|
|
perl -e '@s = stat("$@"); print pack("N", @s[7])' && \
|
|
cat $@ \
|
|
) > $@.relocate
|
|
@mv $@.relocate $@
|
|
endef
|
|
|
|
### Image scripts ###
|
|
define rootfspad/jffs2-128k
|
|
--align-rootfs
|
|
endef
|
|
define rootfspad/jffs2-64k
|
|
--align-rootfs
|
|
endef
|
|
define rootfspad/squashfs
|
|
endef
|
|
|
|
define Image/FileSystemStrip
|
|
$(firstword $(subst +,$(space),$(subst root.,,$(notdir $(1)))))
|
|
endef
|
|
|
|
define Build/cfe-bin
|
|
$(STAGING_DIR_HOST)/bin/imagetag -i $(IMAGE_KERNEL) -f $(IMAGE_ROOTFS) \
|
|
--output $@ --boardid $(CFE_BOARD_ID) --chipid $(CHIP_ID) \
|
|
--entry $(LOADER_ENTRY) --load-addr $(LOADER_ENTRY) \
|
|
--info1 "$(call ModelNameLimit16,$(DEVICE_NAME))" \
|
|
--info2 "$(call Image/FileSystemStrip,$(IMAGE_ROOTFS))" \
|
|
$(call rootfspad/$(call Image/FileSystemStrip,$(IMAGE_ROOTFS))) \
|
|
$(CFE_EXTRAS) $(1)
|
|
endef
|
|
|
|
define Build/cfe-jffs2
|
|
$(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
|
|
--big-endian \
|
|
--pad \
|
|
--no-cleanmarkers \
|
|
--eraseblock=$(patsubst %k,%KiB,$(BLOCKSIZE)) \
|
|
--root=$(1) \
|
|
--output=$@ \
|
|
--compression-mode=none
|
|
|
|
$(call Build/pad-to,$(BLOCKSIZE))
|
|
endef
|
|
|
|
define Build/cfe-jffs2-cferam
|
|
mv $@ $@.kernel
|
|
|
|
rm -rf $@-cferam
|
|
mkdir -p $@-cferam
|
|
|
|
# CFE ROM checks JFFS2 dirent version of cferam.
|
|
# If version is not > 0 it will ignore the fs entry.
|
|
# JFFS2 sets version 0 to the first fs entry and increments
|
|
# it on the following ones, so let's create a dummy file that
|
|
# will have version 0 and let cferam be the second (version 1).
|
|
touch $@-cferam/1-openwrt
|
|
# Add cferam as the last file in the JFFS2 partition
|
|
cp $(KDIR)/bcm63xx-cfe/$(CFE_RAM_FILE) $@-cferam/$(CFE_RAM_JFFS2_NAME)
|
|
|
|
# The JFFS2 partition creation should result in the following
|
|
# layout:
|
|
# 1) 1-openwrt (version 0, ino 2)
|
|
# 2) cferam.000 (version 1, ino 3)
|
|
$(call Build/cfe-jffs2,$@-cferam)
|
|
|
|
# Some devices need padding between CFE RAM and kernel
|
|
$(if $(CFE_RAM_JFFS2_PAD),$(call Build/pad-to,$(CFE_RAM_JFFS2_PAD)))
|
|
|
|
# Add CFE partition tag
|
|
$(if $(CFE_PART_ID),$(call Build/cfe-part-tag))
|
|
|
|
# Append kernel
|
|
dd if=$@.kernel >> $@
|
|
rm -f $@.kernel
|
|
endef
|
|
|
|
define Build/cfe-jffs2-kernel
|
|
rm -rf $@-kernel
|
|
mkdir -p $@-kernel
|
|
|
|
# CFE RAM checks JFFS2 dirent version of vmlinux.
|
|
# If version is not > 0 it will ignore the fs entry.
|
|
# JFFS2 sets version 0 to the first fs entry and increments
|
|
# it on the following ones, so let's create a dummy file that
|
|
# will have version 0 and let cferam be the second (version 1).
|
|
touch $@-kernel/1-openwrt
|
|
# vmlinux is located on a different JFFS2 partition, but CFE RAM
|
|
# ignores it, so let's create another dummy file that will match
|
|
# the JFFS2 ino of cferam entry on the first JFFS2 partition.
|
|
# CFE RAM won't be able to find vmlinux if cferam has the same
|
|
# ino as vmlinux.
|
|
touch $@-kernel/2-openwrt
|
|
# Add vmlinux as the last file in the JFFS2 partition
|
|
$(TOPDIR)/scripts/cfe-bin-header.py \
|
|
--input-file $@ \
|
|
--output-file $@-kernel/vmlinux.lz \
|
|
--load-addr $(if $(DEVICE_LOADADDR),$(DEVICE_LOADADDR),$(LOADER_ENTRY)) \
|
|
--entry-addr $(if $(DEVICE_LOADADDR),$(DEVICE_LOADADDR),$(LOADER_ENTRY))
|
|
|
|
# The JFFS2 partition creation should result in the following
|
|
# layout:
|
|
# 1) 1-openwrt (version 0, ino 2)
|
|
# 2) 2-openwrt (version 1, ino 3)
|
|
# 3) vmlinux.lz (version 2, ino 4)
|
|
$(call Build/cfe-jffs2,$@-kernel)
|
|
endef
|
|
|
|
define Build/cfe-part-tag
|
|
mv $@ $@.part
|
|
|
|
$(TOPDIR)/scripts/cfe-partition-tag.py \
|
|
--input-file $@.part \
|
|
--output-file $@ \
|
|
--flags $(CFE_PART_FLAGS) \
|
|
--id $(CFE_PART_ID) \
|
|
--name $(VERSION_CODE) \
|
|
--version $(DEVICE_NAME)
|
|
|
|
$(call Build/pad-to,$(BLOCKSIZE))
|
|
|
|
dd if=$@.part >> $@
|
|
endef
|
|
|
|
define Build/cfe-sercomm-crypto
|
|
$(TOPDIR)/scripts/sercomm-crypto.py \
|
|
--input-file $@ \
|
|
--key-file $@.key \
|
|
--output-file $@.ser \
|
|
--version OpenWrt
|
|
$(STAGING_DIR_HOST)/bin/openssl enc -md md5 -aes-256-cbc \
|
|
-in $@ -out $@.enc \
|
|
-K `cat $@.key` \
|
|
-iv 00000000000000000000000000000000
|
|
dd if=$@.enc >> $@.ser
|
|
mv $@.ser $@
|
|
rm -f $@.enc $@.key
|
|
endef
|
|
|
|
define Build/cfe-sercomm-load
|
|
$(TOPDIR)/scripts/sercomm-payload.py \
|
|
--input-file $@ \
|
|
--output-file $@.new \
|
|
--pid "$(SERCOMM_PID)"
|
|
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Build/cfe-sercomm-part
|
|
$(TOPDIR)/scripts/sercomm-partition-tag.py \
|
|
--input-file $@ \
|
|
--output-file $@.kernel_rootfs \
|
|
--part-name kernel_rootfs \
|
|
--part-version OpenWrt \
|
|
--rootfs-version $(SERCOMM_VERSION)
|
|
|
|
rm -rf $@-rootfs_lib
|
|
mkdir -p $@-rootfs_lib
|
|
echo $(SERCOMM_VERSION) > $@-rootfs_lib/lib_ver
|
|
$(call Build/cfe-jffs2,$@-rootfs_lib)
|
|
$(call Build/pad-to,$(BLOCKSIZE))
|
|
$(TOPDIR)/scripts/sercomm-partition-tag.py \
|
|
--input-file $@ \
|
|
--output-file $@.rootfs_lib \
|
|
--part-name rootfs_lib \
|
|
--part-version $(SERCOMM_VERSION)
|
|
|
|
mv $@.kernel_rootfs $@
|
|
dd if=$@.rootfs_lib >> $@
|
|
endef
|
|
|
|
define Build/cfe-wfi-tag
|
|
$(TOPDIR)/scripts/cfe-wfi-tag.py \
|
|
--input-file $@ \
|
|
--output-file $@.new \
|
|
--version $(if $(1),$(1),$(CFE_WFI_VERSION)) \
|
|
--chip-id $(CFE_WFI_CHIP_ID) \
|
|
--flash-type $(CFE_WFI_FLASH_TYPE) \
|
|
$(if $(CFE_WFI_FLAGS),--flags $(CFE_WFI_FLAGS))
|
|
mv $@.new $@
|
|
endef
|
|
|
|
### Device scripts ###
|
|
define Device/Default
|
|
PROFILES = Default $$(DEVICE_NAME)
|
|
KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
|
|
DEVICE_DTS_DIR := ../dts
|
|
CHIP_ID :=
|
|
SOC = bcm$$(CHIP_ID)
|
|
DEVICE_DTS = $$(SOC)-$(subst _,-,$(1))
|
|
DEVICE_LOADADDR :=
|
|
endef
|
|
|
|
ATH9K_PACKAGES := kmod-ath9k wpad-basic-wolfssl
|
|
B43_PACKAGES := kmod-b43 wpad-basic-wolfssl
|
|
USB1_PACKAGES := kmod-usb-ohci kmod-ledtrig-usbdev
|
|
USB2_PACKAGES := $(USB1_PACKAGES) kmod-usb2
|
|
|
|
include bcm63xx_$(SUBTARGET).mk
|
|
|
|
$(eval $(call BuildImage))
|