d8e8a2a8db
It still requires fixing PCIe support: [ 6.644699] pcie_iproc_bcma bcma0:7: host bridge /axi@18000000/pcie@12000 ranges: [ 6.652217] pcie_iproc_bcma bcma0:7: No bus range found for /axi@18000000/pcie@12000, using [bus 00-ff] [ 6.661833] OF: /axi@18000000/pcie@12000: Missing device_type [ 6.667622] pcie_iproc_bcma: probe of bcma0:7 failed with error -12 [ 6.673985] pcie_iproc_bcma bcma0:8: host bridge /axi@18000000/pcie@13000 ranges: [ 6.681514] pcie_iproc_bcma bcma0:8: No bus range found for /axi@18000000/pcie@13000, using [bus 00-ff] [ 6.691137] pcie_iproc_bcma: probe of bcma0:8 failed with error -12 [ 6.697522] pcie_iproc_bcma bcma0:9: host bridge /axi@18000000/pcie@14000 ranges: [ 6.705048] pcie_iproc_bcma bcma0:9: No bus range found for /axi@18000000/pcie@14000, using [bus 00-ff] [ 6.714669] pcie_iproc_bcma: probe of bcma0:9 failed with error -12 Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
72 lines
1.8 KiB
Diff
72 lines
1.8 KiB
Diff
From bd9a01e28e5d1632528e531480b42d6e2c861d88 Mon Sep 17 00:00:00 2001
|
|
From: Vivek Unune <npcomplete13@gmail.com>
|
|
Date: Sun, 1 Nov 2020 15:08:03 -0500
|
|
Subject: [PATCH] ARM: dts: BCM5301X: Linksys EA9500 add fixed partitions
|
|
|
|
This router has dual paritions to store trx firmware image and
|
|
dual partitions for nvram. The second one in each of these cases acts
|
|
as a backup store.
|
|
|
|
When tested with OpenWrt, the default partition parser causes two issues:
|
|
|
|
1. It labels both nvram partitions as nvram. In factory, second one is
|
|
labeled devinfo.
|
|
2. It parses second trx image and tries to create second 'linux' partition
|
|
and fails with - cannot create duplicate 'linux' partition
|
|
|
|
The following patch works around both of these issues.
|
|
|
|
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
|
|
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
---
|
|
.../boot/dts/bcm47094-linksys-panamera.dts | 41 +++++++++++++++++++
|
|
1 file changed, 41 insertions(+)
|
|
|
|
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
|
|
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
|
|
@@ -292,3 +292,44 @@
|
|
&usb3_phy {
|
|
status = "okay";
|
|
};
|
|
+
|
|
+&nandcs {
|
|
+ partitions {
|
|
+ compatible = "fixed-partitions";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+
|
|
+ partition@0 {
|
|
+ label = "boot";
|
|
+ reg = <0x0000000 0x0080000>;
|
|
+ read-only;
|
|
+ };
|
|
+
|
|
+ partition@80000 {
|
|
+ label = "nvram";
|
|
+ reg = <0x080000 0x0100000>;
|
|
+ };
|
|
+
|
|
+ partition@180000{
|
|
+ label = "devinfo";
|
|
+ reg = <0x0180000 0x080000>;
|
|
+ };
|
|
+
|
|
+ partition@200000 {
|
|
+ label = "firmware";
|
|
+ reg = <0x0200000 0x01D00000>;
|
|
+ compatible = "brcm,trx";
|
|
+ };
|
|
+
|
|
+ partition@1F00000 {
|
|
+ label = "failsafe";
|
|
+ reg = <0x01F00000 0x01D00000>;
|
|
+ read-only;
|
|
+ };
|
|
+
|
|
+ partition@5200000 {
|
|
+ label = "system";
|
|
+ reg = <0x05200000 0x02E00000>;
|
|
+ };
|
|
+ };
|
|
+};
|