Openwrt

Openwrt build for Asrock G10 Router

Go to file

Felix Fietkau 4482d10a04 hostapd: append nasid to config for all WPA types The 802.11r implementation in hostapd uses nas_identifier as PMK-R0 Key Holder identifier. As 802.11r can also be used with WPA Personal, nasid should be appended to the hostapd config for all WPA types. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> SVN-Revision: 45049		2015-03-26 23:34:10 +00:00
config	kernel: cleanup seccomp symbol selection	2015-03-26 10:57:51 +00:00
docs
include	build: ignore errors on copying firmware binaries from $(KDIR) to $(BIN_DIR)	2015-03-26 18:50:13 +00:00
package	hostapd: append nasid to config for all WPA types	2015-03-26 23:34:10 +00:00
scripts	buildroot: make it easier to build all kmods	2015-03-16 11:51:54 +00:00
target	mxs: enable uboot-mxs-duckbill build for duckbill profile	2015-03-26 23:04:27 +00:00
toolchain	toolchain: fix eglibc build when TOOLCHAINOPTS is not set	2015-03-26 10:59:04 +00:00
tools	automake: portability fixes	2015-03-24 13:13:01 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	scripts/config: sync with linux upstream	2015-01-08 14:33:53 +00:00
feeds.conf.default	feeds.conf.default: add new targets feed	2015-03-19 11:58:35 +00:00
LICENSE
Makefile	Revert "build: use ONESHELL to speed up scanning and the toplevel makefile"	2014-10-22 10:47:26 +00:00
README
rules.mk	rules.mk: add newline definition	2015-03-15 19:47:46 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org