Openwrt build for Asrock G10 Router
Go to file
2009-05-31 17:15:09 +00:00
docs a couple of small fixes in the Wireless documentation 2009-05-22 13:45:22 +00:00
include fix typo 2009-05-31 16:15:47 +00:00
package madwifi: handle frame classification properly if eth->h_proto contains the protocol number directly (without offset) 2009-05-31 17:15:09 +00:00
scripts deptest: use a separate build dir for host packages to prevent hardcoded path screwups 2009-05-28 23:49:13 +00:00
target add diag.sh to report boot status on the front-led of the machine 2009-05-31 13:55:35 +00:00
toolchain uClibc: bsd supports the same floating point classification functions as c99, fixes inetd 2009-05-29 10:32:17 +00:00
tools fix download url 2009-05-31 10:07:35 +00:00
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh 2009-05-28 18:40:37 +00:00
README
rules.mk Set TARGET_CXX to 'no' if c++ is not enabled in the toolchain. 2009-05-30 15:48:44 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org