Openwrt build for Asrock G10 Router
Go to file
2012-01-20 02:55:55 +00:00
docs
include site: add configure cache scripts for mips-linux-gnu and mipsel-linux-gnu, used by CodeSourcery toolchain 2012-01-19 03:10:27 +00:00
package kernel: fix OCF for linux 3.2 2012-01-19 19:51:54 +00:00
scripts ext-toolchain.sh: CONFIG_NLS -> CONFIG_BUILD_NLS 2012-01-19 00:03:52 +00:00
target kernel: fix OCF for linux 3.2 2012-01-19 19:51:54 +00:00
toolchain invoke patch-specs.sh in the gcc/final install stage. Patch up OpenWrts own cross toolchains to always search headers and libraries in $STAGING_DIR, this should solve most issues with missing headers, indirect linking and not found libraries. At a later stage, all -I and -L flags will be purged from TARGET_LDFLAGS and TARGET_CPPFLAGS. 2012-01-18 03:15:22 +00:00
tools automake: make relocatable by searching resources relative to STAGING_DIR 2012-01-20 02:55:55 +00:00
.gitignore
BSDmakefile
Config.in if CONFIG_BUILD_NLS is selected, compile uClibc with locale support 2012-01-01 15:11:11 +00:00
feeds.conf.default
LICENSE
Makefile abort built in prereq target if there is no site config file for the current target 2012-01-19 12:19:28 +00:00
README
rules.mk use ext-toolchain.sh to integrate external toolchains Use ext-toolchain.sh to wrap external toolchain commands, abort build if certain features such as CONFIG_SOFT_FLOAT or CONFIG_IPV6 are enabled but not supported by the toolchain. 2012-01-18 03:08:09 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org