Openwrt

Openwrt build for Asrock G10 Router

Go to file

Jo-Philipp Wich 3edf9c3544 Never write errors to stdout from ipkg-make-index.sh Since the output of ipkg-make-index.sh is unconditionally used to create the Packages file, sending the errors into this file is unacceptable (both because they are not shown to users and because they make an invalid Packages file). For incorrect invocation, write to stderr. For errors from which, send to /dev/null with stdout. Signed-off-by: Kevin Locke <klocke@digitalenginesoftware.com> SVN-Revision: 25677		2011-02-23 22:58:58 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	kernel: remove imq support, refresh patches	2011-02-21 02:06:51 +00:00
package	kernel: fix path to pcidev driver	2011-02-23 21:51:17 +00:00
scripts	Never write errors to stdout from ipkg-make-index.sh	2011-02-23 22:58:58 +00:00
target	switch to 2.6.37.1	2011-02-23 22:28:46 +00:00
toolchain	remove the CS variant - broken since it's addition	2011-02-21 11:43:16 +00:00
tools	tools/e2fsprogs: move uuid/uuid.h into a subdirectory, it conflicts with a system header file with the same name on darwin	2011-02-20 03:25:56 +00:00
.gitignore	.gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default	2010-12-04 10:27:13 +00:00
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk	add a variable LIBRPC to refer to the external librpc if used	2011-02-13 01:45:07 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org