Openwrt/target/linux/brcm63xx/patches-3.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch
Jonas Gorski 2bab3e2796 brcm63xx: move board compatible strings into a table
Move compatible strings from board structs into separate table. This
allows for several board compatibles to match to the same board in case
e.g. only the flash size / partitions differ.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43341
2014-11-22 12:25:52 +00:00

105 lines
2.2 KiB
Diff

From f0649f7b7c672cf452a1796a1422bf615e1973f8 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski@gmail.com>
Date: Tue, 29 May 2012 11:01:12 +0200
Subject: [PATCH] MIPS: BCM63XX: add 963281TAN reference board
---
arch/mips/bcm63xx/boards/board_bcm963xx.c | 71 +++++++++++++++++++++++++++++
1 files changed, 71 insertions(+), 0 deletions(-)
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -154,6 +154,76 @@ static struct board_info __initdata boar
},
},
};
+
+static struct board_info __initdata board_963281TAN = {
+ .name = "963281TAN",
+ .expected_cpu_id = 0x6328,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+
+ .has_enetsw = 1,
+
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+
+ .leds = {
+ {
+ .name = "963281TAN::internet",
+ .gpio = 1,
+ .active_low = 1,
+ },
+ {
+ .name = "963281TAN::power",
+ .gpio = 4,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "963281TAN::internet-fail",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "963281TAN::power-fail",
+ .gpio = 8,
+ .active_low = 1,
+ },
+ {
+ .name = "963281TAN::wps",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ {
+ .name = "963281TAN::dsl",
+ .gpio = 11,
+ .active_low = 1,
+ },
+
+ },
+};
#endif /* CONFIG_BCM63XX_CPU_6328 */
/*
@@ -2105,6 +2175,7 @@ static const struct board_info __initcon
#endif
#ifdef CONFIG_BCM63XX_CPU_6328
&board_96328avng,
+ &board_963281TAN,
#endif
#ifdef CONFIG_BCM63XX_CPU_6338
&board_96338gw,
@@ -2161,6 +2232,7 @@ static struct of_device_id const bcm963x
{ .compatible = "netgear,cvg834g", .data = &board_cvg834g, },
#endif
#ifdef CONFIG_BCM63XX_CPU_6328
+ { .compatible = "brcm,bcm963281TAN", .data = &board_963281TAN, },
{ .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
#endif
#ifdef CONFIG_BCM63XX_CPU_6338