Openwrt

Openwrt build for Asrock G10 Router

Go to file

Rafał Miłecki 39940fac6b imx6: add platform_pre_upgrade for sysupgrade We're in process of cleaning nand_do_platform_check. Currently is leaves a special mark in /tmp/sysupgrade-nand-path triggering some diffent code path in nand_upgrade_stage1. This can be a bit confusing. The plan is to have the check function only check the image and nothing else. Then platform code (platform_pre_upgrade) should trigger NAND specific upgrade path. This is what this patch implements. This follows ar71xx, lantiq and partially bcm53xx. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46944		2015-09-15 16:05:03 +00:00
config	linux: make IPv6 builtin if selected (saves >30KB)	2015-09-09 12:20:36 +00:00
docs	build: Prevent more gzip timestamps	2015-07-14 09:57:45 +00:00
include	include: toplevel: drop unused OPENWRTVERSION variable	2015-09-14 07:40:40 +00:00
package	ppp: use more reliable way to set script environment	2015-09-15 14:52:47 +00:00
scripts	scripts/om-fwupgradecfg-gen.sh: add support for the MR1750	2015-09-14 20:11:18 +00:00
target	imx6: add platform_pre_upgrade for sysupgrade	2015-09-15 16:05:03 +00:00
toolchain	Revert "musl: fix termios struct c_ispeed/c_ospeed field names" (accidental commit)	2015-09-13 17:39:24 +00:00
tools	tools/make-ext4fs: prefer static linking	2015-09-14 15:15:15 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile	Makefile: move the cleaning of staging_dir/target* from dirclean to clean	2015-06-14 17:47:16 +00:00
README
rules.mk	rules.mk: remove GCC 4.4 and GCC 4.5 conditional	2015-08-25 07:45:42 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org