6555612783
This adds PLL settings for the ethernet ports of the TP-Link TL-WR1043
v2/v3 and the Openmesh OM5P-AC-v2.
We also change the PLL-settings in the qca9557.dtsi to match the ones
used as default on the ar71xx target.
As of 4b9680f138 those devices have broken ethernet ports as the default
PLL settings defined in the QCA9557.dtsi are applied which are off for
those devices.
Signed-off-by: David Bauer <mail@david-bauer.net>
325 lines
6.5 KiB
Plaintext
325 lines
6.5 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
#include <dt-bindings/clock/ath79-clk.h>
|
|
#include "ath79.dtsi"
|
|
|
|
/ {
|
|
compatible = "qca,qca9557";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "mips,mips74Kc";
|
|
clocks = <&pll ATH79_CLK_CPU>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
extosc: ref {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-output-names = "ref";
|
|
clock-frequency = <40000000>;
|
|
};
|
|
|
|
ahb {
|
|
apb {
|
|
ddr_ctrl: memory-controller@18000000 {
|
|
compatible = "qca,ar9557-ddr-controller",
|
|
"qca,ar7240-ddr-controller";
|
|
reg = <0x18000000 0x100>;
|
|
|
|
#qca,ddr-wb-channel-cells = <1>;
|
|
};
|
|
|
|
uart: uart@18020000 {
|
|
compatible = "ns16550a";
|
|
reg = <0x18020000 0x20>;
|
|
|
|
interrupts = <3>;
|
|
|
|
clocks = <&pll ATH79_CLK_REF>;
|
|
clock-names = "uart";
|
|
|
|
reg-io-width = <4>;
|
|
reg-shift = <2>;
|
|
no-loopback-test;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
usb_phy0: usb-phy0 {
|
|
compatible ="qca,qca9550-usb-phy", "qca,ar7200-usb-phy";
|
|
|
|
reset-names = "usb-phy", "usb-suspend-override";
|
|
resets = <&rst 4>, <&rst 3>;
|
|
|
|
#phy-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
usb_phy1: usb-phy1 {
|
|
compatible = "qca,qca9550-usb-phy", "qca,ar7200-usb-phy";
|
|
|
|
reset-names = "usb-phy", "usb-suspend-override";
|
|
resets = <&rst2 4>, <&rst2 3>;
|
|
|
|
#phy-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio: gpio@18040000 {
|
|
compatible = "qca,ar9557-gpio",
|
|
"qca,ar9340-gpio";
|
|
reg = <0x18040000 0x28>;
|
|
|
|
interrupts = <2>;
|
|
ngpios = <24>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
pinmux: pinmux@1804002c {
|
|
compatible = "pinctrl-single";
|
|
|
|
reg = <0x1804002c 0x40>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
pinctrl-single,bit-per-mux;
|
|
pinctrl-single,register-width = <32>;
|
|
pinctrl-single,function-mask = <0x1>;
|
|
#pinctrl-cells = <2>;
|
|
|
|
jtag_disable_pins: pinmux_jtag_disable_pins {
|
|
pinctrl-single,bits = <0x40 0x2 0x2>;
|
|
};
|
|
};
|
|
|
|
pll: pll-controller@18050000 {
|
|
compatible = "qca,ar9557-pll",
|
|
"qca,qca9550-pll", "syscon";
|
|
reg = <0x18050000 0x50>;
|
|
|
|
#clock-cells = <1>;
|
|
clock-output-names = "cpu", "ddr", "ahb";
|
|
|
|
clocks = <&extosc>;
|
|
};
|
|
|
|
wdt: wdt@18060008 {
|
|
compatible = "qca,ar7130-wdt";
|
|
reg = <0x18060008 0x8>;
|
|
|
|
interrupts = <4>;
|
|
|
|
clocks = <&pll ATH79_CLK_AHB>;
|
|
clock-names = "wdt";
|
|
};
|
|
|
|
rst: reset-controller@1806001c {
|
|
compatible = "qca,qca9550-reset",
|
|
"qca,ar7100-reset",
|
|
"simple-bus";
|
|
reg = <0x1806001c 0x4>;
|
|
|
|
#reset-cells = <1>;
|
|
interrupt-parent = <&cpuintc>;
|
|
|
|
intc2: interrupt-controller2 {
|
|
compatible = "qca,ar9340-intc";
|
|
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
qca,int-status-addr = <0xac>;
|
|
qca,pending-bits = <0xf>, /* wmac */
|
|
<0x1f0>; /* pcie rc 0 */
|
|
};
|
|
|
|
intc3: interrupt-controller3 {
|
|
compatible = "qca,ar9340-intc";
|
|
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <3>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
qca,int-status-addr = <0xac>;
|
|
qca,pending-bits = <0x1f000>, /* pcie rc 1 */
|
|
<0x1000000>, /* usb1 */
|
|
<0x10000000>; /* usb2 */
|
|
};
|
|
};
|
|
|
|
rst2: reset-controller@180600c0 {
|
|
compatible = "qca,qca9550-reset",
|
|
"qca,ar7100-reset",
|
|
"simple-bus";
|
|
reg = <0x180600c0 0x4>;
|
|
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
pcie0: pcie-controller@180c0000 {
|
|
compatible = "qcom,ar7240-pci";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
bus-range = <0x0 0x0>;
|
|
reg = <0x180c0000 0x1000>, /* CRP */
|
|
<0x180f0000 0x100>, /* CTRL */
|
|
<0x14000000 0x1000>; /* CFG */
|
|
reg-names = "crp_base", "ctrl_base", "cfg_base";
|
|
ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
|
|
0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
|
|
interrupt-parent = <&intc2>;
|
|
interrupts = <1>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
interrupt-map-mask = <0 0 0 1>;
|
|
interrupt-map = <0 0 0 0 &pcie0 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie1: pcie-controller@18250000 {
|
|
compatible = "qcom,ar7240-pci";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
bus-range = <0x0 0x0>;
|
|
reg = <0x18250000 0x1000>, /* CRP */
|
|
<0x18280000 0x100>, /* CTRL */
|
|
<0x16000000 0x1000>; /* CFG */
|
|
reg-names = "crp_base", "ctrl_base", "cfg_base";
|
|
ranges = <0x2000000 0 0x12000000 0x12000000 0 0x02000000 /* pci memory */
|
|
0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
|
|
interrupt-parent = <&intc3>;
|
|
interrupts = <0>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
interrupt-map-mask = <0 0 0 1>;
|
|
interrupt-map = <0 0 0 0 &pcie1 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gmac: gmac@18070000 {
|
|
compatible = "qca,qca9550-gmac";
|
|
reg = <0x18070000 0x14>;
|
|
};
|
|
|
|
wmac: wmac@18100000 {
|
|
compatible = "qca,qca9550-wmac";
|
|
reg = <0x18100000 0x10000>;
|
|
|
|
interrupt-parent = <&intc2>;
|
|
interrupts = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usb0: usb@1b000000 {
|
|
compatible = "generic-ehci";
|
|
reg = <0x1b000000 0x1fc>;
|
|
|
|
interrupt-parent = <&intc3>;
|
|
interrupts = <1>;
|
|
resets = <&rst 5>;
|
|
reset-names = "usb-host";
|
|
|
|
has-transaction-translator;
|
|
caps-offset = <0x100>;
|
|
|
|
phy-names = "usb-phy0";
|
|
phys = <&usb_phy0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
usb1: usb@1b400000 {
|
|
compatible = "generic-ehci";
|
|
reg = <0x1b400000 0x1fc>;
|
|
|
|
interrupt-parent = <&intc3>;
|
|
interrupts = <2>;
|
|
resets = <&rst2 5>;
|
|
reset-names = "usb-host";
|
|
|
|
has-transaction-translator;
|
|
caps-offset = <0x100>;
|
|
|
|
phy-names = "usb-phy1";
|
|
phys = <&usb_phy1>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi: spi@1f000000 {
|
|
compatible = "qca,ar9557-spi", "qca,ar7100-spi";
|
|
reg = <0x1f000000 0x10>;
|
|
|
|
clocks = <&pll ATH79_CLK_AHB>;
|
|
clock-names = "ahb";
|
|
|
|
status = "disabled";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdio0 {
|
|
resets = <&rst 22>;
|
|
reset-names = "mdio";
|
|
};
|
|
|
|
ð0 {
|
|
compatible = "qca,qca9550-eth", "syscon", "simple-mfd";
|
|
|
|
pll-reg = <0 0x28 0>;
|
|
pll-handle = <&pll>;
|
|
|
|
pll-data = <0x16000000 0x00000101 0x00001616>;
|
|
phy-mode = "rgmii";
|
|
|
|
resets = <&rst 9>;
|
|
reset-names = "mac";
|
|
};
|
|
|
|
&mdio1 {
|
|
resets = <&rst 23>;
|
|
reset-names = "mdio";
|
|
};
|
|
|
|
ð1 {
|
|
compatible = "qca,qca9550-eth", "syscon", "simple-mfd";
|
|
|
|
pll-reg = <0 0x48 0>;
|
|
pll-handle = <&pll>;
|
|
|
|
pll-data = <0x16000000 0x00000101 0x00001616>;
|
|
phy-mode = "sgmii";
|
|
|
|
resets = <&rst 13>;
|
|
reset-names = "mac";
|
|
};
|