Openwrt

Openwrt build for Asrock G10 Router

Go to file

Gabor Juhos 38fced86ee base-files: add support for the morse LED trigger Write "delay" and "message" options to their respective files, allowing Morse code message configuration through UCI. The delay (dit length) defaults to 150ms (about 8 words per minute, suitable for beginners). Signed-off-by: Petr Viktorin <encukou@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34380		2012-11-25 17:20:49 +00:00
docs
include	add preliminary support for musl	2012-11-23 20:02:29 +00:00
package	base-files: add support for the morse LED trigger	2012-11-25 17:20:49 +00:00
scripts	add preliminary support for musl	2012-11-23 20:02:29 +00:00
target	brcm47xx: fix title of Bcm4705-wl profile	2012-11-25 16:41:00 +00:00
toolchain	musl: backport an upstream fix for MIPS and termios constants	2012-11-23 22:43:11 +00:00
tools	ipkg-utils: Force gnu format for tar (#12496 )	2012-11-19 19:29:01 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	hide C++ standard library selection behind INSTALL_LIBSTDCPP	2012-10-24 13:05:07 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk	rules.mk: fix misspelled config symbol introduced by r34300	2012-11-23 10:12:18 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org