EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
36bb1196d1
Openwrt/target/linux/ramips/image/rt3883.mk
Michael Pratt a459696eb1 ramips: add support for Senao Engenius ESR600H 
FCC ID: A8J-ESR750H

Engenius ESR600H is an indoor wireless router with a gigabit switch,
2.4 GHz and 5 GHz wireless, internal and external antennas, and a USB port.

**Specification:**

  - RT3662F			MIPS SOC, 5 GHz WMAC (2x2)
  - RT5392L			PCI on-board, 2.4 GHz (2x2)
  - AR8327			RGMII, 7-port GbE, 25 MHz clock
  - 40 MHz reference clock
  - 8 MB FLASH			25L6406EM2I-12G
  - 64 MB RAM
  - UART at J12			(unpopulated)
  - 2 internal antennas		(5 GHz)
  - 2 external antennas		(2.4 GHz)
  - 9 LEDs, 1 button		(power, wps, wifi2g, wifi5g, 5 LAN/WAN)
  - USB 2 port			(GPIO controlled power)

**MAC addresses:**

  MAC Addresses are labeled as WAN and WLAN
  U-boot environment has the the vendor MAC address for ethernet
  MAC addresses in "factory" are part of wifi calibration data

  eth0.2	WAN	*:13:e7		u-boot-env wanaddr
  eth0.1	----	*:13:e8		u-boot-env wanaddr + 1
  phy0		WLAN	*:14:b8		factory 0x8004
  phy1		----	*:14:bc		factory 0x4

**Installation:**

  Method 1: Firmware upgrade page

  OEM webpage at 192.168.0.1
  username and password "admin"
  Navigate to Network Setting --> Tools --> Firmware
  Click Browse and select the factory.dlf image
  Click Continue to confirm and wait 6 minutes or more...

  Method 2: Serial console to load TFTP image:

  (see TFTP recovery)

**Return to OEM:**

  Unlike most Engenius boards, this does not have a 'failsafe' image
  the only way to return to OEM is serial access to uboot

  Unlike most Engenius boards, public images are not available...
  so the only way to return to OEM is to have a copy
  of the MTD partition "firmware" BEFORE flashing openwrt.

**TFTP recovery:**

  Unlike most Engenius boards, TFTP is reliable here
  however it requires serial console access
  (soldering pins to the UART pinouts)

  build your own image...
  with 'ramdisk' selected under 'Target Images'

  rename initramfs-kernel.bin to 'uImageESR-600H'
  make the file available on a TFTP server at 192.168.99.8
  interrupt boot by holding or pressing '4' in serial console
  as soon as board is powered on

  `tftpboot 0x81000000`
  `bootm 0x81000000`
  perform a sysupgrade

**Format of OEM firmware image:**

  This Engenius board uses the Senao proprietary header
  with a unique Product ID. The header for factory.bin is
  generated by the mksenaofw program included in openwrt.

  .dlf file extension is also required for OEM software to accept it

**Note on using OKLI:**

  the kernel is now too large for the bootloader to handle
  so OKLI is used via the `kernel-loader` image command
  recently in master several other ramips boards have the same problem

  'Kernel panic - not syncing: Failed to find ralink,rt3883-sysc node'

  see commit ad19751edc

Signed-off-by: Michael Pratt <mcpratt@pm.me>
2020-12-22 19:11:50 +01:00

148 lines
3.8 KiB
Makefile
Raw Blame History

#
# RT3662/RT3883 Profiles
#
define Build/mkrtn56uimg
$(STAGING_DIR_HOST)/bin/mkrtn56uimg $(1) $@
endef
define Device/asus_rt-n56u
SOC := rt3662
BLOCKSIZE := 64k
IMAGE_SIZE := 7872k
IMAGE/sysupgrade.bin += | mkrtn56uimg -s
DEVICE_VENDOR := Asus
DEVICE_MODEL := RT-N56U
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2
SUPPORTED_DEVICES += rt-n56u
endef
TARGET_DEVICES += asus_rt-n56u
define Device/belkin_f9k1109v1
SOC := rt3883
BLOCKSIZE := 64k
DEVICE_VENDOR := Belkin
DEVICE_MODEL := F9K1109
DEVICE_VARIANT := Version 1.0
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
IMAGE_SIZE := 7808k
KERNEL := kernel-bin | append-dtb | lzma -d16 | uImage lzma
# Stock firmware checks for this uImage image name during upload.
UIMAGE_NAME := N750F9K1103VB
endef
TARGET_DEVICES += belkin_f9k1109v1
define Device/dlink_dir-645
$(Device/seama)
$(Device/uimage-lzma-loader)
SOC := rt3662
BLOCKSIZE := 4k
IMAGE_SIZE := 7872k
KERNEL := kernel-bin | append-dtb | lzma -d10
SEAMA_SIGNATURE := wrgn39_dlob.hans_dir645
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-645
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2
SUPPORTED_DEVICES += dir-645
endef
TARGET_DEVICES += dlink_dir-645
define Device/edimax_br-6475nd
SOC := rt3662
BLOCKSIZE := 64k
IMAGE_SIZE := 7744k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
edimax-header -s CSYS -m RN54 -f 0x70000 -S 0x01100000 | pad-rootfs | \
append-metadata | check-size
DEVICE_VENDOR := Edimax
DEVICE_MODEL := BR-6475nD
SUPPORTED_DEVICES += br-6475nd
endef
TARGET_DEVICES += edimax_br-6475nd
define Device/engenius_esr600h
$(Device/uimage-lzma-loader)
SOC := rt3662
BLOCKSIZE := 4k
IMAGE_SIZE := 7872k
IMAGES += factory.dlf
IMAGE/factory.dlf := $$(sysupgrade_bin) | check-size | \
senao-header -r 0x101 -p 0x44 -t 2
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := ESR600H
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 uboot-envtools
endef
TARGET_DEVICES += engenius_esr600h
define Device/loewe_wmdr-143n
SOC := rt3662
BLOCKSIZE := 64k
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Loewe
DEVICE_MODEL := WMDR-143N
SUPPORTED_DEVICES += wmdr-143n
endef
TARGET_DEVICES += loewe_wmdr-143n
define Device/omnima_hpm
SOC := rt3662
BLOCKSIZE := 64k
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Omnima
DEVICE_MODEL := HPM
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2
SUPPORTED_DEVICES += hpm
endef
TARGET_DEVICES += omnima_hpm
define Device/samsung_cy-swr1100
$(Device/seama)
SOC := rt3662
BLOCKSIZE := 64k
IMAGE_SIZE := 7872k
KERNEL := $(KERNEL_DTB)
SEAMA_SIGNATURE := wrgnd10_samsung_ss815
DEVICE_VENDOR := Samsung
DEVICE_MODEL := CY-SWR1100
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
SUPPORTED_DEVICES += cy-swr1100
endef
TARGET_DEVICES += samsung_cy-swr1100
define Device/sitecom_wlr-6000
SOC := rt3883
BLOCKSIZE := 4k
IMAGE_SIZE := 7244k
IMAGES += factory.dlf
IMAGE/factory.dlf := $$(sysupgrade_bin) | check-size | \
senao-header -r 0x0202 -p 0x41 -t 2
DEVICE_VENDOR := Sitecom
DEVICE_MODEL := WLR-6000
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2
SUPPORTED_DEVICES += wlr-6000
endef
TARGET_DEVICES += sitecom_wlr-6000
define Device/trendnet_tew-691gr
SOC := rt3883
BLOCKSIZE := 64k
IMAGE_SIZE := 7872k
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | umedia-header 0x026910
DEVICE_VENDOR := TRENDnet
DEVICE_MODEL := TEW-691GR
SUPPORTED_DEVICES += tew-691gr
endef
TARGET_DEVICES += trendnet_tew-691gr
define Device/trendnet_tew-692gr
SOC := rt3883
BLOCKSIZE := 64k
IMAGE_SIZE := 7872k
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | umedia-header 0x026920
DEVICE_VENDOR := TRENDnet
DEVICE_MODEL := TEW-692GR
SUPPORTED_DEVICES += tew-692gr
endef
TARGET_DEVICES += trendnet_tew-692gr
Reference in New Issue View Git Blame Copy Permalink