667f6c7f49
Manually rebased patches:
bcm27xx/patches-5.4/950-0135-spi-spi-bcm2835-Disable-forced-software-CS.patch
generic-backport/744-v5.5-net-sfp-soft-status-and-control-support.patch
layerscape/patches-5.4/819-uart-0005-tty-serial-fsl_lpuart-enable-dma-mode-for-imx8qxp.patch
mvebu/patches-5.4/521-arm64-dts-marvell-espressobin-Add-ethernet-switch-al.patch
Removed:
layerscape/patches-5.4/819-uart-0012-tty-serial-lpuart-add-LS1028A-support.patch
All modifications made by update_kernel.sh
Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711,
lantiq/Easybox 904 xDSL, x86_64
Run-tested: ipq806x/R7800, lantiq/Easybox 904 xDSL, x86_64
No dmesg regressions, everything functional
Signed-off-by: John Audia <graysky@archlinux.us>
Co-developed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
34 lines
999 B
Diff
34 lines
999 B
Diff
From 4792ff641cc8993606013d27d84cda59d8cc76c5 Mon Sep 17 00:00:00 2001
|
|
From: Tim Harvey <tharvey@gateworks.com>
|
|
Date: Tue, 12 May 2020 15:02:34 -0700
|
|
Subject: [PATCH 08/20] ARM: dts: imx6qdl-gw5910: fix wlan regulator
|
|
|
|
Connect the wl_reg regulator to usdhc2 such that it can be enabled
|
|
and disabled as needed. There is no need for this to be always-on.
|
|
|
|
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
|
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
---
|
|
arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 3 +--
|
|
1 file changed, 1 insertion(+), 2 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
|
|
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
|
|
@@ -79,7 +79,6 @@
|
|
enable-active-high;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
- regulator-always-on;
|
|
};
|
|
};
|
|
|
|
@@ -249,7 +248,7 @@
|
|
&usdhc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc2>;
|
|
- vmmc-supply = <®_3p3v>;
|
|
+ vmmc-supply = <®_wl>;
|
|
non-removable;
|
|
bus-width = <4>;
|
|
status = "okay";
|