Openwrt/target/linux/bcm63xx/dts/bcm6368-netgear-dgnd3700-v1.dts
Adrian Schmutzler c98819a9e6 bcm63xx: move dts-v1 statement to top-level DTSI files
The "/dts-v1/;" identifier is supposed to be present once at the
top of a device tree file after the includes have been processed.

Like done for other targets recently, put the dts-v1 statement
into the top-level SoC-based DTSI files, and remove all other
occurences.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-10 20:00:34 +02:00

217 lines
3.3 KiB
Plaintext

#include "bcm6368.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Netgear DGND3700v1/DGND3800B";
compatible = "netgear,dgnd3700-v1", "brcm,bcm6368";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_green;
led-running = &led_power_green;
led-upgrade = &led_power_green;
};
chosen {
bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
wlan {
label = "wlan";
gpios = <&pinctrl 10 1>;
linux,code = <KEY_WLAN>;
debounce-interval = <60>;
};
reset {
label = "reset";
gpios = <&pinctrl 12 1>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
wps {
label = "wps";
gpios = <&pinctrl 35 1>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
dsl_green {
label = "green:dsl";
gpios = <&pinctrl 2 1>;
};
inet_red {
label = "red:inet";
gpios = <&pinctrl 4 1>;
};
inet_green {
label = "green:inet";
gpios = <&pinctrl 5 1>;
};
wps_green {
label = "green:wps";
gpios = <&pinctrl 11 1>;
};
usbfront_green {
label = "green:usb-front";
gpios = <&pinctrl 13 1>;
};
usbback_green {
label = "green:usb-back";
gpios = <&pinctrl 14 1>;
};
power_red {
label = "red:power";
gpios = <&pinctrl 22 1>;
};
lan_green {
label = "green:lan";
gpios = <&pinctrl 23 1>;
};
led_power_green: power_green {
label = "green:power";
gpios = <&pinctrl 24 1>;
default-state = "on";
};
wifi2g_green {
label = "green:wifi2g";
gpios = <&pinctrl 26 1>;
};
wifi5g_blue {
label = "blue:wifi5g";
gpios = <&pinctrl 27 1>;
};
};
};
&pflash {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
read-only;
};
linux@20000 {
label = "linux";
reg = <0x020000 0x1e20000>;
compatible = "brcm,bcm963xx-imagetag";
};
board_data@1e40000 {
label = "board_data";
reg = <0x1e40000 0x1a0000>;
read-only;
};
nvram@1fe0000 {
label = "nvram";
reg = <0x1fe0000 0x20000>;
};
};
};
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pci>;
};
&lsspi {
switch@1 {
compatible = "brcm,bcm53115";
reg = <1>;
spi-max-frequency = <781000>;
lede,alias = "eth0";
ports {
#address-cells = <1>;
#size-cells = <0>;
wan@0 {
reg = <0>;
label = "wan";
};
lan@1 {
reg = <1>;
label = "lan4";
};
lan@2 {
reg = <2>;
label = "lan3";
};
lan@3 {
reg = <3>;
label = "lan2";
};
lan@4 {
reg = <4>;
label = "lan1";
};
cpu@8 {
reg = <8>;
label = "cpu";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
};
&nflash {
status = "okay";
nandcs@0 {
compatible = "brcm,nandcs";
#size-cells = <1>;
#address-cells = <1>;
reg = <0>;
nand-ecc-step-size = <512>;
nand-ecc-strength = <15>;
nand-on-flash-bbt;
brcm,nand-oob-sector-size = <64>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "storage";
reg = <0x0000000 0x8000000>;
};
};
};
};
&uart0 {
status = "okay";
};