Openwrt/target/linux/bcm63xx/dts/bcm6362-sagem-fast-2504n.dts
Adrian Schmutzler c98819a9e6 bcm63xx: move dts-v1 statement to top-level DTSI files
The "/dts-v1/;" identifier is supposed to be present once at the
top of a device tree file after the includes have been processed.

Like done for other targets recently, put the dts-v1 statement
into the top-level SoC-based DTSI files, and remove all other
occurences.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-10 20:00:34 +02:00

114 lines
1.9 KiB
Plaintext

#include "bcm6362.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Sagem F@st 2504N";
compatible = "sagem,fast-2504n", "brcm,bcm6362";
aliases {
led-boot = &led_ok_green;
led-failsafe = &led_ok_green;
led-running = &led_ok_green;
led-upgrade = &led_ok_green;
};
chosen {
bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&pinctrl 24 1>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
wps {
label = "wps";
gpios = <&pinctrl 25 1>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
power_orange {
label = "orange:power";
gpios = <&pinctrl 2 1>;
};
power_green {
label = "green:power";
gpios = <&pinctrl 10 1>;
default-state = "on";
};
inet_red {
label = "red:internet";
gpios = <&pinctrl 26 1>;
};
led_ok_green: ok_green {
label = "green:ok";
gpios = <&pinctrl 28 1>;
};
ok_orange {
label = "orange:ok";
gpios = <&pinctrl 29 1>;
};
wlan_orangee {
label = "orange:wlan";
gpios = <&pinctrl 30 1>;
};
};
};
&hsspi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <20000000>;
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
linux@10000 {
reg = <0x010000 0x7e0000>;
label = "linux";
compatible = "brcm,bcm963xx-imagetag";
};
nvram@7f0000 {
reg = <0x7f0000 0x010000>;
label = "nvram";
};
};
};
};
&uart0 {
status = "okay";
};