Openwrt/target/linux/bcm63xx/dts/bcm6361-sfr-neufbox-6-sercomm-r0.dts
Adrian Schmutzler c98819a9e6 bcm63xx: move dts-v1 statement to top-level DTSI files
The "/dts-v1/;" identifier is supposed to be present once at the
top of a device tree file after the includes have been processed.

Like done for other targets recently, put the dts-v1 statement
into the top-level SoC-based DTSI files, and remove all other
occurences.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-10 20:00:34 +02:00

99 lines
1.7 KiB
Plaintext

#include "bcm6362.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "SFR Neufbox 6 (Sercomm)";
compatible = "sfr,neufbox-6-sercomm-r0", "brcm,bcm6361", "brcm,bcm6362";
chosen {
bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
service {
label = "service";
gpios = <&pinctrl 10 1>;
linux,code = <BTN_0>;
debounce-interval = <60>;
};
wlan {
label = "wlan";
gpios = <&pinctrl 12 1>;
linux,code = <KEY_WLAN>;
debounce-interval = <60>;
};
reset {
label = "reset";
gpios = <&pinctrl 24 1>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
wps {
label = "wps";
gpios = <&pinctrl 25 1>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
};
switch {
compatible = "realtek,rtl8367";
gpio-sda = <&pinctrl 18 0>;
gpio-sck = <&pinctrl 20 0>;
realtek,extif0 = <1 5 1 1 1 1 1 1 2>;
};
};
&hsspi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <20000000>;
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
linux@10000 {
reg = <0x010000 0xfe0000>;
label = "linux";
compatible = "brcm,bcm963xx-imagetag";
};
nvram@ff0000 {
reg = <0xff0000 0x010000>;
label = "nvram";
};
};
};
};
&uart0 {
status = "okay";
};