Openwrt/target/linux/bcm63xx/dts/bcm6358-comtrend-ct-6373.dts
Adrian Schmutzler c98819a9e6 bcm63xx: move dts-v1 statement to top-level DTSI files
The "/dts-v1/;" identifier is supposed to be present once at the
top of a device tree file after the includes have been processed.

Like done for other targets recently, put the dts-v1 statement
into the top-level SoC-based DTSI files, and remove all other
occurences.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-10 20:00:34 +02:00

108 lines
1.5 KiB
Plaintext

#include "bcm6358.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Comtrend CT-6373";
compatible = "comtrend,ct-6373", "brcm,bcm6358";
chosen {
bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&pinctrl 35 1>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
power_green {
label = "green:power";
gpios = <&pinctrl 0 0>;
default-state = "on";
};
usb_green {
label = "green:usb";
gpios = <&pinctrl 3 1>;
};
wlan_green {
label = "green:wlan";
gpios = <&pinctrl 9 1>;
};
};
};
&leds {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_serial_led>;
led@0 {
reg = <0>;
active-low;
label = "green:adsl";
};
led@1 {
reg = <1>;
active-low;
label = "green:line";
};
led@2 {
reg = <2>;
active-low;
label = "green:fxs1";
};
led@3 {
reg = <3>;
active-low;
label = "green:fxs2";
};
};
&pflash {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
linux@10000 {
label = "linux";
reg = <0x010000 0x7e0000>;
compatible = "brcm,bcm963xx-imagetag";
};
nvram@7f0000 {
label = "nvram";
reg = <0x7f0000 0x010000>;
};
};
};
&uart0 {
status = "okay";
};