Openwrt/target/linux/bcm63xx/dts/bcm6328-sercomm-ad1018.dts
Adrian Schmutzler c98819a9e6 bcm63xx: move dts-v1 statement to top-level DTSI files
The "/dts-v1/;" identifier is supposed to be present once at the
top of a device tree file after the includes have been processed.

Like done for other targets recently, put the dts-v1 statement
into the top-level SoC-based DTSI files, and remove all other
occurences.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-10 20:00:34 +02:00

221 lines
3.4 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later
#include "bcm6328.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Sercomm AD1018";
compatible = "sercomm,ad1018", "brcm,bcm6328";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_green;
led-running = &led_power_green;
led-upgrade = &led_power_green;
};
chosen {
bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
wps {
label = "wps";
gpios = <&pinctrl 24 1>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
wifi {
label = "wifi";
gpios = <&pinctrl 25 1>;
linux,code = <KEY_WLAN>;
debounce-interval = <60>;
};
reset {
label = "reset";
gpios = <&pinctrl 31 1>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
};
};
&leds {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds &pinctrl_serial_led
&pinctrl_ephy0_spd_led &pinctrl_ephy1_act_led
&pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
brcm,serial-leds;
brcm,serial-shift-inv;
brcm,serial-dat-low;
led@0 {
reg = <0>;
active-low;
label = "red:internet";
};
led@1 {
reg = <1>;
active-low;
label = "green:internet";
};
led_power_green: led@8 {
reg = <8>;
active-low;
label = "green:power";
default-state = "on";
};
led@10 {
reg = <10>;
active-low;
label = "green:adsl";
};
led@11 {
reg = <11>;
active-low;
label = "red:adsl";
};
led@12 {
reg = <12>;
active-low;
label = "green:phone";
};
led@13 {
reg = <13>;
active-low;
label = "green:wps";
};
led@14 {
reg = <14>;
active-low;
label = "green:wifi";
};
led@15 {
reg = <15>;
active-low;
label = "green:usb";
};
led@17 {
/* EPHY0 Spd */
reg = <17>;
brcm,hardware-controlled;
};
};
&nflash {
status = "okay";
nandcs@0 {
compatible = "brcm,nandcs";
#size-cells = <1>;
#address-cells = <1>;
reg = <0>;
nand-ecc-step-size = <512>;
nand-ecc-strength = <15>;
nand-on-flash-bbt;
brcm,nand-oob-sector-size = <64>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "cferom";
reg = <0x0000000 0x0020000>;
read-only;
};
partition@20000 {
label = "mmap";
reg = <0x0020000 0x00a0000>;
read-only;
};
partition@c0000 {
label = "cferam1";
reg = <0x00c0000 0x0140000>;
read-only;
};
partition@200000 {
label = "cferam2";
reg = <0x0200000 0x0140000>;
read-only;
};
partition@340000 {
label = "serial";
reg = <0x0340000 0x00a0000>;
read-only;
};
partition@3e0000 {
label = "protect";
reg = <0x03e0000 0x0140000>;
read-only;
};
partition@6920000 {
label = "bootflag1";
reg = <0x6920000 0x0140000>;
};
partition@6a60000 {
label = "bootflag2";
reg = <0x6a60000 0x0140000>;
};
partition@520000 {
compatible = "sercomm,wfi";
label = "wfi";
reg = <0x0520000 0x6400000>;
};
partition@6ba0000 {
label = "xml_cfg";
reg = <0x6ba0000 0x0280000>;
read-only;
};
partition@6e20000 {
label = "app_dat";
reg = <0x6e20000 0x0280000>;
read-only;
};
};
};
};
&pinctrl {
pinctrl_leds: leds {
function = "led";
pins = "gpio0", "gpio1";
};
};
&uart0 {
status = "okay";
};