Openwrt/target/linux/bcm63xx/dts/bcm6318-sagem-fast-2704n.dts
Adrian Schmutzler c98819a9e6 bcm63xx: move dts-v1 statement to top-level DTSI files
The "/dts-v1/;" identifier is supposed to be present once at the
top of a device tree file after the includes have been processed.

Like done for other targets recently, put the dts-v1 statement
into the top-level SoC-based DTSI files, and remove all other
occurences.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-10 20:00:34 +02:00

141 lines
2.3 KiB
Plaintext

#include "bcm6318.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Sagem F@st 2704N";
compatible = "sagem,fast-2704n", "brcm,bcm6318";
aliases {
led-boot = &led_power_red;
led-failsafe = &led_power_red;
led-running = &led_power_red;
led-upgrade = &led_power_red;
};
chosen {
bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
wlan {
label = "wlan";
gpios = <&pinctrl 1 0>;
linux,code = <KEY_WLAN>;
debounce-interval = <60>;
};
wps {
label = "wps";
gpios = <&pinctrl 33 1>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
reset {
label = "reset";
gpios = <&pinctrl 34 1>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
wps_green {
label = "green:wps";
gpios = <&pinctrl 2 1>;
};
lan1_green {
label = "green:lan1";
gpios = <&pinctrl 4 1>;
};
lan2_green {
label = "green:lan2";
gpios = <&pinctrl 5 1>;
};
lan3_green {
label = "green:lan3";
gpios = <&pinctrl 6 1>;
};
lan4_green {
label = "green:lan4";
gpios = <&pinctrl 7 1>;
};
inet_green {
label = "green:inet";
gpios = <&pinctrl 8 1>;
};
inet_red {
label = "red:inet";
gpios = <&pinctrl 9 1>;
};
dsl_green {
label = "green:dsl";
gpios = <&pinctrl 10 1>;
};
led_power_red: power_red {
label = "red:power";
gpios = <&pinctrl 11 1>;
};
power_green {
label = "green:power";
gpios = <&pinctrl 47 1>;
default-state = "on";
};
usb_green {
label = "green:usb";
gpios = <&pinctrl 49 1>;
};
};
};
&hsspi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <62500000>;
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
linux@10000 {
reg = <0x010000 0x7e0000>;
label = "linux";
compatible = "brcm,bcm963xx-imagetag";
};
nvram@7f0000 {
reg = <0x7f0000 0x010000>;
label = "nvram";
};
};
};
};
&uart0 {
status = "okay";
};