c98819a9e6
The "/dts-v1/;" identifier is supposed to be present once at the top of a device tree file after the includes have been processed. Like done for other targets recently, put the dts-v1 statement into the top-level SoC-based DTSI files, and remove all other occurences. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
88 lines
1.4 KiB
Plaintext
88 lines
1.4 KiB
Plaintext
#include "bcm6318.dtsi"
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
model = "Broadcom BCM96318REF_P300 reference board";
|
|
compatible = "brcm,bcm96318ref-p300", "brcm,bcm6318";
|
|
|
|
chosen {
|
|
bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys-polled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
poll-interval = <20>;
|
|
|
|
wps {
|
|
label = "wps";
|
|
gpios = <&pinctrl 33 1>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
debounce-interval = <60>;
|
|
};
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&pinctrl 34 1>;
|
|
linux,code = <KEY_RESTART>;
|
|
debounce-interval = <60>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
inet {
|
|
label = "green:inet";
|
|
gpios = <&pinctrl 8 1>;
|
|
};
|
|
|
|
inet_fail {
|
|
label = "red:inet-fail";
|
|
gpios = <&pinctrl 9 1>;
|
|
};
|
|
|
|
post_failed {
|
|
label = "red:post-failed";
|
|
gpios = <&pinctrl 11 1>;
|
|
};
|
|
|
|
usb_pwron {
|
|
label = "usb-pwron";
|
|
gpios = <&pinctrl 13 1>;
|
|
default-state = "on";
|
|
};
|
|
};
|
|
};
|
|
|
|
&hsspi {
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
spi-max-frequency = <62500000>;
|
|
spi-tx-bus-width = <2>;
|
|
spi-rx-bus-width = <2>;
|
|
reg = <0>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partitions {
|
|
compatible = "brcm,bcm963xx-cfe-nor-partitions";
|
|
};
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb_pwron>;
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|