Openwrt/target/linux/bcm63xx/dts/bcm63168-comtrend-vr-3032u.dts
Adrian Schmutzler c98819a9e6 bcm63xx: move dts-v1 statement to top-level DTSI files
The "/dts-v1/;" identifier is supposed to be present once at the
top of a device tree file after the includes have been processed.

Like done for other targets recently, put the dts-v1 statement
into the top-level SoC-based DTSI files, and remove all other
occurences.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-10 20:00:34 +02:00

184 lines
2.7 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later
#include "bcm63268.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Comtrend VR-3032u";
compatible = "comtrend,vr-3032u", "brcm,bcm63168", "brcm,bcm63268";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_green;
led-running = &led_power_green;
led-upgrade = &led_power_green;
};
chosen {
bootargs = "rootfstype=squashfs,ubifs noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&pinctrl 33 1>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
wps {
label = "wps";
gpios = <&pinctrl 34 1>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
};
};
&leds {
status = "okay";
brcm,serial-leds;
brcm,serial-dat-low;
brcm,serial-shift-inv;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_serial_led>;
led@0 {
/* GPHY0 Spd 0 */
reg = <0>;
brcm,hardware-controlled;
brcm,link-signal-sources = <0>;
};
led@1 {
/* GPHY0 Spd 1 */
reg = <1>;
brcm,hardware-controlled;
brcm,link-signal-sources = <1>;
};
led@2 {
reg = <2>;
active-low;
label = "red:inet";
};
led@3 {
reg = <3>;
active-low;
label = "green:dsl";
};
led@4 {
reg = <4>;
active-low;
label = "green:usb";
};
led@7 {
reg = <7>;
active-low;
label = "green:wps";
};
led@8 {
reg = <8>;
active-low;
label = "green:inet";
};
led@9 {
/* EPHY0 Act */
reg = <9>;
brcm,hardware-controlled;
};
led@10 {
/* EPHY1 Act */
reg = <10>;
brcm,hardware-controlled;
};
led@11 {
/* EPHY2 Act */
reg = <11>;
brcm,hardware-controlled;
};
led@12 {
/* GPHY0 Act */
reg = <12>;
brcm,hardware-controlled;
};
led@13 {
/* EPHY0 Spd */
reg = <13>;
brcm,hardware-controlled;
};
led@14 {
/* EPHY1 Spd */
reg = <14>;
brcm,hardware-controlled;
};
led@15 {
/* EPHY2 Spd */
reg = <15>;
brcm,hardware-controlled;
};
led_power_green: led@20 {
reg = <20>;
active-low;
label = "green:power";
default-state = "on";
};
};
&nflash {
status = "okay";
nandcs@0 {
compatible = "brcm,nandcs";
#size-cells = <1>;
#address-cells = <1>;
reg = <0>;
nand-ecc-step-size = <512>;
nand-ecc-strength = <15>;
nand-on-flash-bbt;
brcm,nand-oob-sector-size = <64>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "cferom";
reg = <0x0000000 0x0020000>;
read-only;
};
partition@20000 {
compatible = "brcm,wfi-split";
label = "wfi";
reg = <0x0020000 0x7ac0000>;
};
};
};
};
&uart0 {
status = "okay";
};