EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Openwrt build for Asrock G10 Router
20,294 Commits 1 Branch 0 Tags 212 MiB
3626444c6d
Go to file
Gabor Juhos 3626444c6d ramips: rt305x: add support for the Asus WL-330N3G board 
This patch adds support for the ASUS WL-330N3G

Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led.

The bi-color led is driven by 2 gpio.
I don't know how to handle this, so I simply made 2 leds : one red, one blue.
But the red light takes precedence over the blue one according to the chart below.

r = led is red
b = led is blue
0 = led is off

xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness

initial state	action	 led	gpio state

r0	b0	r0->r1	 r  	r0	b0
r0	b0	b0->b1   b	r0	b1

r1	b0	r1->r0	 0	r0	b0
r1	b0	b0->b1	 r	r1	*b1*

r1	b1	r1->r0   b	r0	b1
r1	b1	b1->b0   r	r1	b0

r0	b1	r0->r1   r	r1	*b1*
r0	b1	b1->b0   0	r0	r0

Signed-off-by: Frédéric Leroy <fredo@starox.org>

SVN-Revision: 31450
2012-04-23 16:56:05 +00:00
docs
include ensure that profile Makefiles are sourced in alphabetical order Since make 3.82 does not guarantee file ordering anymore, target profiles might get included in random order, leading to bad default values when only selecting the toplevel target and populating the .config with defconfig. This commit should also fix the ar71xx snapshot builds. 2012-04-23 16:10:25 +00:00
package 6to4: follow RFC 6598 and consider 100.61.0.0/10 a private range (#11323) 2012-04-23 10:12:00 +00:00
scripts allow arbitary folder layout when using localmirrors 2012-04-10 14:11:45 +00:00
target ramips: rt305x: add support for the Asus WL-330N3G board 2012-04-23 16:56:05 +00:00
toolchain remove screwed up patch for gcc 4.7-linaro which got committed by accident 2012-04-21 10:23:49 +00:00
tools tools: add xz dependency to automake 2012-04-21 16:09:04 +00:00
.gitignore
BSDmakefile
Config.in make xz ramdisk images also available for 2.6.39+ 2012-04-18 15:14:05 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk Use build suffix on build_dir paths 2012-04-10 10:55:55 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org