Openwrt

Openwrt build for Asrock G10 Router

Go to file

Felix Fietkau 35cdc5d722 hostapd/mac80211: implement support for AP+STA SVN-Revision: 23602		2010-10-23 23:39:54 +00:00
docs
include	Add md5sum for linux-2.6.36	2010-10-20 23:07:35 +00:00
package	hostapd/mac80211: implement support for AP+STA	2010-10-23 23:39:54 +00:00
scripts	Fix typo	2010-10-18 21:43:50 +00:00
target	add required symbols to allow building of 2.6.35.7	2010-10-23 18:56:19 +00:00
toolchain	gcc 4.4.5 support	2010-10-04 12:21:58 +00:00
tools	tools/mtd-utils: add two upstream patches	2010-10-15 07:52:37 +00:00
.gitignore
BSDmakefile
Config.in	as we only support 2.6, remove the useless bool for it	2010-10-05 14:19:00 +00:00
feeds.conf.default
LICENSE
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README
rules.mk	Add HOST_FPIC. It currently always is -fPIC, because that should work on all platforms, even if it may generate slightly inefficient code on some arches.	2010-10-23 20:30:43 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org