Openwrt

Openwrt build for Asrock G10 Router

Go to file

Hauke Mehrtens 31c2c485c1 kernel: ssb: add PCI IDs 0x4322 and 43222 The 0x4322 ID is found on the BCM4322 used on some SoCs like the Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID is found on the BCM43222 used on some other SoCs like the D-Link DSL-2760U connected to a BCM63xx. This fixes #10887. SVN-Revision: 31695		2012-05-13 00:08:12 +00:00
docs
include	add further countermeasures against the git core.autocrlf option (fixes #9075 )	2012-05-08 13:30:54 +00:00
package	ath9k: fix ar9330 internal regulator setup	2012-05-12 17:41:05 +00:00
scripts	download.pl: - cleanup cache handling code - use alternative m// and s/// delimiters to get rid of tedious slash escaping - use multi-argument form of system() where possible to avoid quoting & escaping issues - avoid a temporary variable	2012-05-11 18:17:15 +00:00
target	kernel: ssb: add PCI IDs 0x4322 and 43222	2012-05-13 00:08:12 +00:00
toolchain	switch to 2.6.38	2012-05-01 07:00:17 +00:00
tools	scons: fix compatibility with python 3, upstream still does not support it...	2012-05-06 17:04:37 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org