Openwrt

Openwrt build for Asrock G10 Router

Go to file

Luka Perkov 30c39f99a7 kirkwood: dockstar: remove sata from packages The dockstar doesn't have any sata ports. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 39596		2014-02-16 00:14:29 +00:00
config	config: lxc: enable KERNEL_POSIX_MQUEUE	2014-01-24 13:49:39 +00:00
docs
include	upgrade 3.13 targets to 3.13.2, refresh patches	2014-02-13 13:27:14 +00:00
package	uboot-kirkwood: add support for Seagate GoFlexNet	2014-02-16 00:14:26 +00:00
scripts	scripts/kconfig.pl: Indicate which file we couldn't open	2014-01-19 17:27:04 +00:00
target	kirkwood: dockstar: remove sata from packages	2014-02-16 00:14:29 +00:00
toolchain	upgrade Linaro GCC 4.8 to 2014.01	2014-02-06 10:28:45 +00:00
tools	quilt: update to 0.61	2014-02-02 23:41:32 +00:00
.gitattributes
.gitignore	add git-src to .gitignore	2014-01-12 12:06:39 +00:00
BSDmakefile
Config.in	move menuconfig options into separate files	2013-11-22 14:30:40 +00:00
feeds.conf.default	feeds: disable the x-wrt feed, it is unmaintained	2014-02-03 14:29:04 +00:00
LICENSE
Makefile
README
rules.mk	FPU type should not interfere with the ABI selection. Also make sure we either do real soft-float or hard-float on ARM, with the right options.	2013-11-29 10:59:51 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org