Openwrt

Openwrt build for Asrock G10 Router

Go to file

Michael Büsch 306caa660a hostapd: use patches to add the nl80211 driver instead of copying the files. SVN-Revision: 10475		2008-02-17 12:18:33 +00:00
docs
include	revert ARM to oabi by default, add some eabi patches for fixing up the toolchain, which unfortunately break eabi userland, but are IMHO a necessary basis for further eabi fixes	2008-02-14 14:31:31 +00:00
package	hostapd: use patches to add the nl80211 driver instead of copying the files.	2008-02-17 12:18:33 +00:00
scripts
target	bcm47xx: Remove FIXME We don't want to move the board time init into SSB. It's just fine as-is. Remove the FIXME.	2008-02-17 11:59:28 +00:00
toolchain	add missing config change for OABI	2008-02-14 19:41:33 +00:00
tools
.gitignore	add package/openwrt-packages to .gitignore	2008-02-09 16:01:34 +00:00
BSDmakefile
Config.in
feeds.conf
LICENSE
Makefile
README
rules.mk	revert ARM to oabi by default, add some eabi patches for fixing up the toolchain, which unfortunately break eabi userland, but are IMHO a necessary basis for further eabi fixes	2008-02-14 14:31:31 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org