Openwrt

Openwrt build for Asrock G10 Router

Go to file

Hauke Mehrtens 30408f1cc4 brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed. SVN-Revision: 30488		2012-02-12 22:41:20 +00:00
docs
include	kernel: update linux 3.2 to 3.2.5	2012-02-10 08:19:23 +00:00
package	swconfig: fix off-by-one error, causing segfaults on gcc 4.6+ (fixes #9765 )	2012-02-12 19:27:01 +00:00
scripts	patch-specs.sh: gcc 3.4.6 has an additional "(OpenWrt-2.0)" after the version tag, cope with that	2012-01-29 20:19:06 +00:00
target	brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed.	2012-02-12 22:41:20 +00:00
toolchain	gcc 4.6: port over the missing patch 850-use_shared_libgcc.patch to prevent libgcc crap from leaking into every single binary	2012-02-12 20:25:47 +00:00
tools	tools/genext2fs: do not include the host getline.h, it breaks the tool in subtle ways, and the source already has a getline replacement	2012-02-12 16:12:08 +00:00
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile	abort built in prereq target if there is no site config file for the current target	2012-01-19 12:19:28 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
rules.mk	rules.mk: filter "." and "./" entries from $PATH, prevents toolchain build issues and likely other problems	2012-01-29 23:34:25 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org